PRO NanoTOP - Professional stain remover for kitchen tops - Lithofin
This product is a high performance solvent-based impregnation for natural and artificial stone surfaces.
Nano-substances make the stones water and oil repellent and protect them without changing their appearance.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
2 | 3 % | €64.37 |
3 | 4 % | €63.71 |
5 | 5 % | €63.04 |
10 | 10 % | €59.72 |
PRO NanoTOP - Professional stain remover for kitchen tops - Lithofin
High performance impregnation with water- and oil-repellent nano-substances in a polysiloxane base, containing solvents.
Lithofin NanoTOP is very fluid, colorless, ready to use and easy to use.
It protects natural stones from stains and dirt, without altering the characteristic appearance of a stone.
the substances form a very thin film in the capillaries, invisible on the surface.
The product helps that water, oils and fats are not absorbed, but remain on the surface.
The substances are maintained on the surface depending on the type of stone and the type of treatment.
Water vapor permeability is largely retained. The substances are UV-resistant and do not yellow.
Technical specifications :
- Density: approx. 0.8g/cm³
- Flash point: approx. 24°C (cc)
- Consistency: colorless
- Smell: aromatic
Application domain :
For ultimate stain protection around the home, easy maintenance of most stone surfaces. Particularly suitable for kitchen worktops and other stain-prone surfaces such as tables, counters and window sills, as well as bathrooms.
Substrates: granites, gneiss, gabbros, polished or honed and similar, as well as brushed surfaces.
Manual :
- Distribute Lithofin NanoTOP evenly with a clean brush, roller or cloth. For very porous surfaces, if necessary repeat the procedure after 10 minutes.
- Leave on for 20 minutes. Important for unpolished surfaces: wipe off all excess product with a dry cloth before drying.
- If necessary, moisten the cloth with a little product and process dry.
- Dried residue on a polished hard stone can be removed within 12 hours with a microfiber cloth or white pad.
Yield :
Depends on the porosity of the treated material. Reference values :
- Granites, polished gneiss: approx. 15 m²/litre
- Sawn granite: approx. 10 m²/litre
- Brushed surfaces: approx. 6-20 m²/litre
Data sheet
- Signal word
- DANGER
- Hazard statements
- H226 – Flammable liquid and vapour
H304 – May be fatal if swallowed and enters airways.
H336 – May cause drowsiness or dizziness.
H412 – Harmful to aquatic life with long lasting effects. - Hazard pictogram
-
GHS02 - FlammableGHS07 - HarmfulGHS08 - Health hazard
Specific References
- EAN13
- 4001524002514