Reactiv Leaf Bronze - Bronze aspect coating - Owatrol

Reactiv Leaf Bronze - Bronze aspect coating - Owatrol

This Bronze coating is applicable on properly prepared supports.
This product gives a Bronze appearance and allows, with the combined application of Bronze spirit , to obtain decorative effects of natural Blue Oxide .

Properties :

• Scentless.
• Yield: approximately 5 m² / L depending on the porosity of the support and the desired decorative effect.

Application :

1. Shake well before use.
2. Ready to use, do not dilute.
3. Apply a coat of Reactiv leaf bronze using a brush or a roller (medium hair) to cover the sound, dry and clean support, and correctly prepared.
4. Wait 6 hours before applying a second coat of Reactiv leaf bronze, then, after 5 minutes, spray the Bronze spirit to activate the still wet Reactiv leaf bronze and create your natural Blue Oxide decor.
5. Apply the product between 5°C and 25°C in the absence of bad weather and residual humidity.

Destination :

• Reactiv leaf bronze can be applied to all correctly prepared, healthy, clean and dry supports.
  It is not necessary on Bronze supports because the Bronze spirit directly oxidizes the Bronze.
• On substrates with difficult adhesion (plastic, glass, ceramic, stainless steel, non-ferrous metals, etc.) the prior application of the Absolute primer undercoat is necessary.
• On substrates sensitive to acids (certain plastics, tannic woods such as oak, chestnut, etc.), the prior application of Blocking primer is necessary.

Conditioning :

0.5L and 2.5L.