Reactiv Leaf Copper - Copper look coating - Owatrol

Reactiv Leaf Copper - Copper look coating - Owatrol

This copper coating is applicable on properly prepared supports.
This product gives a Copper appearance and allows, with the combined application of Copper spirit , to obtain decorative effects of natural Verdigris .

Properties :

• Scentless.
• Enables verdigris oxidation when used with Copper Spirit.
• Suitable for indoor and outdoor use.
• Yield: approximately 5 m²/L depending on the porosity of the support and the desired decorative effect.

Application :

1. Shake well before use.
2. Ready to use, do not dilute. Apply a coat of Reactiv leaf copper using a brush or roller (medium hair) to cover the sound, dry and clean support, and correctly prepared (see above).
3. Wait 6 hours before applying a second coat of Reactiv leaf copper, then, after 5 minutes, spray the Copper spirit to activate the still wet Reactiv leaf copper and create your natural Verdigris decor.
4. Apply the product between 5°C and 25°C in the absence of bad weather and residual humidity

Destination :

• Reactiv leaf copper can be applied to all properly prepared, healthy, clean and dry supports (excluding copper).
• On substrates with difficult adhesion (plastic, glass, ceramic, stainless steel, non-ferrous metals, etc.) the prior application of the Absolute primer undercoat is necessary.
• On substrates sensitive to acids (certain plastics, tannic woods such as oak, chestnut, etc.), the prior application of Blocking primer is necessary.

Conditioning :

0.5L and 2.5L.