Owagrip - Polyurethane anti-slip marine paint for decks - Owatrol

Owagrip - Polyurethane anti-slip marine paint for decks - Owatrol

OWAGRIP is a polyurethane anti-slip marine paint for the decks of your boats. Its high-performance formula provides excellent resistance to trampling and harsh weather conditions (rain, UV, wind).

Its non-slip properties adapt perfectly to your decks.

Properties :

• Reinforced anti-corrosion properties + specific anti-UV agents.
• Protects and decorates concrete, screeds, wooden and concrete terraces…
• Excellent resistance to trampling.
• Great resistance to wear and time: non-slip fillers and reinforced formula.
• Satin-matte appearance, delays clogging and reverberation. Great ease of cleaning.

Application :

1. Apply 2 thin coats of OWAGRIP using a lacquer or short nap roller (<12mm).
2. Deposit approximately 150 to 200 microns wet per coat. That is to say a dry film thickness of approximately 100 to 150 microns per thin layer.
3. Proceed with the application in crossed passes.
4. The application is done in successive areas of 1 to 2m². If applying indoors, be sure to apply from the back of the room toward the exit.
5. The gun is not a tool suitable for the best grip; application with a gun requires specific adjustment due to the presence of anti-slip loads.
6. Light traffic within 48 hours but for normal traffic 5 days minimum.

Yield per layer

9 to 10 m² per liter per layer

Destination :

• Interior Exterior.
• Gelcoats, old paints, steel, aluminum and wood.
• Horizontal: floors.

Conditioning :

0.75 L.