Compo-Clean - Special degreaser cleaner for composite woods - Owatrol

Compo-Clean - Special degreaser cleaner for composite woods - Owatrol

Compo-Clean is a cleaner for composite wood , which easily and quickly removes all types of dirt (grease, stains, greening, pollution...).

Compo-clean acts alone by simply rinsing with water.
It is used on vertical ( cladding ) and horizontal ( terraces , etc.) surfaces.

Properties :

• Ready-to-use water-based cleaner.
• Deeply and effortlessly removes all types of dirt.
• Quick: from 5 minutes depending on the nature of the stains.
• Easy to apply because gelled: does not run.
• Solvent and paraffin free.
  Does not attack plastics, swimming pool liners, stone, glass...
• Yield: 5 to 10 m²/litre.

Applications:

1. Always carry out a preliminary test.
2. Wear rubber gloves and adequate protection, a nylon brush or a glue brush.
3. Protect the parts that will not be treated, especially the aluminum parts.
4. Apply a thick layer of Compo-clean over the entire blade to be cleaned.
   On a large surface, work in successive zones.
5. Leave the product to act for 5 minutes.
6. Scrub if necessary using a synthetic brush.
7. Rinse with plenty of water using a jet or a high-pressure cleaner (maximum 50 bars).
8. Repeat the operation if necessary (stubborn stains).

Destination :

• Outside.
• All types of composite wood.
• Vertical and horizontal surfaces.
• Ideal for grooved blades.

Conditioning :

1L, 2.5L and 15L.