MN Multi-Cleaner - Natural stone cleaner - Lithofin
This product is an alkaline cleaner which removes greasy dirt , residues of cleaning products , shiny films or similar.
It is suitable for end-of-site cleaning of new polished marble , limestone and natural stone coverings.
Volume discounts
Quantity | You Save | Unit price |
---|---|---|
2 | 3 % | £8.02 |
3 | 4 % | £7.93 |
5 | 5 % | £7.85 |
10 | 10 % | £7.44 |
MN Multi-Cleaner - Natural stone cleaner - Lithofin
Lithofin MN Multi-Cleanser is a special medium alkalinity cleaning product without solvents.
This concentrate contains a balanced combination of high performance cleansing cleansing agents.
Lithofin MN Multi-Cleanser dissolves and removes greasy and oily dirt, shiny films, residues of floor care products, thin films of wax and general dirt.
Technical specifications :
- Density: approx. 1.0g/cm³
- pH: approx. 9-10 (concentrated)
- Appearance: transparent, colorless
- Odor: non-specific, aromatic
Application domain :
This product can be used both indoors and outdoors for cleaning natural stone surfaces and polished, honed or carved marble of all kinds.
Particularly suitable for the basic cleaning of old, dirty coatings.
Ideal for removing mineral films on polished marble.
Manual :
- Depending on the degree of fouling, Lithofin MN Multi-Cleanser can be applied pure or diluted in 5 volumes of water; if necessary, brush while applying.
- Leave on for 10-20 minutes, brush with water and rinse until clear water is obtained.
- Do not let the product dry out; if the coating is not very dirty, dilute with water.
- On the other hand, if the coating is very dirty, repeat the procedure.
Caution: do not treat delicate surfaces with Lithofin MN Multi-Cleanser. If in doubt, test on an inconspicuous surface.
Yield :
- Approximately 5 to 10 m²/litre depending on soiling.
- More than 30 m²/litre diluted.
Data sheet
- Signal word
- DANGER
- Hazard statements
- H290 – May be corrosive to metals.
H318 – Causes serious eye damage. - Hazard pictogram
-
GHS05 - Corrosive
Specific References
- EAN13
- 9145385989081
Bon produit pour nettoyer les pierres artificielles mais n'a pas réussi à enlever les traces d'urine (raison de mon achat)
Utilisé depuis 15 ans sur un sol en pierres de Lens, nous en sommes très satisfait! Pas d'encrassement, sol parfaitement nettoyé sans trace. Nickel!
Livraison rapide. Ma chienne étant en chaleur, elle m'a sali mes 2 escaliers en granit avec des tâches de sang. J'ai donc téléphoné chez Lithofin qui m'a conseillé d'acheter Lithofin Multi-Nettoyant pour ce genre de tâches. Je l'ai utilisé sur le premier escalier dilué 5 fois (on peut le diluer jusqu'à 10 fois), sans résultat satisfaisant. Sur le second, je l'ai utilisé pur, sans meilleur résultat. J'ai bien laissé le produit reposer 15 min sur les marches avant de brosser comme un fou, mais cela atténue seulement les tâches, mais ne les enlève pas correctement. A la fin, j'ai même nettoyé les 2 escaliers au nettoyeur haute pression, mais on voit toujours quelque chose. Je pense donc avoir été mal conseillé. Peut-être qu'avec un autre produit de la gamme, cela fonctionne mieux
Livraison tres Rapide pour de tres Bon produits. Tres satisfaite.