Egaliser-EN C25 - Levelling mortar - PTB Compaktuna

Egaliser-EN C25 - Levelling mortar - PTB Compaktuna

Equalize-EN C25 is a dry powder , to which you simply add water to obtain a quick leveling mortar , which can be used indoors.
Equalizer-EN C25 consists of cement , selected quartz sands and high quality additives .

Features :

• Does not contain seeds and allows very thin layers to be applied and a smooth surface to be obtained.
• Allows you to compensate for unevenness of 0.5 to 10 mm in 1 coat.
  Walkable after ± 3 hours and can be covered with ceramic after ± 24 hours.
• Ideal support for tiles, laminate, parquet, carpet, cork, vinyl, linoleum, etc.
• Has a very low emission level.

By simply adding water, we obtain a self-leveling mortar with the main properties:

• remarkable self-leveling behavior
• rapid hardening
• excellent grip
• high final strength.

Manual :

Support

Support requirements

1. The application will always be carried out on a raw, clean, healthy surface, free of dust, traces of oil and loose particles. Suitable substrates are screed, raw concrete, prefabricated concrete elements, mortar layers, floors with underfloor heating (not in operation), old tiles, etc.
2. Smooth surfaces (e.g. polished concrete) must first be sanded.
3. Do not use on wet floors or with rising humidity, on unstable surfaces or outdoors.
4. In case of applications on floors with underfloor heating, the residual moisture content must be ≤1.8% MC (Carbide method).

Base layers

1. Coat absorbent substrates such as cement screeds, quick cement screeds and raw concrete with PRIMER PO or with a solution comprising 1 part COMPAKTUNA (PRO) and 3 parts water.
2. Pre-coat non-absorbent, smooth and waterproof surfaces, such as ceramic coverings or smooth concrete, with undiluted PRIMER BL .

Application

1. EQUALIZE-EN C25 is prepared with ±25% water, i.e. ±5 L of water per 20 kg bag depending on the desired consistency.
   Per 20 kg bag, pour the necessary quantity of water into a tank and slowly and evenly add the dry coating.
2. Mix it thoroughly with a slow mixer for 2 minutes until you obtain a homogeneous mass without lumps.
3. The leveling mortar is left to stand for 5 minutes and then mixed thoroughly again.
4. Now pour the EGALISER-EN C25 in strips onto the ground.
   It may be necessary to assist slightly using a rubber spatula, leveling spatula or dot roller.

Consumption :

±1.55 kg/mm/m² powder

Usage time:

±25 mins

Mix ratio:

±5 L of water per 20 kg bag (±25%)

Conditioning :

20 kg: Gray

Formerly: PTB-Egaliser-EN - Leveling mortar - PTB Compaktuna