Zeptreet 100 - Moss remover - Zep Industries

Zeptreet 100 - Moss remover - Zep Industries

Product against moss and lichen deposits .
Liquid algaecide, bactericide, antifungicide . 

Properties :

• Authorisation number Belgium: 10406B.
• The product is diluted equally well with hard water and soft water.
• Very suitable for removing green deposits.
• A safe alternative to strong acids.
• Can be used indoors and outdoors, with normal ventilation.
• Safe to use, harmless, quick and economical application.
• No special tools are needed.
• The treated surface is thoroughly cleaned.
• Active ingredient composition: 45 g/l N,N-didecyldimethylammonium chloride.

Applications:

Combat bacteria and yeasts where food and beverages are prepared, processed or stored; with the exception of milking machines on farms.
Combat bacteria (except Mycobacteria and spores) and yeasts as well as Trichophyton interdigitale in spaces where people are required to reside.

Combat mosses and lichens.
Prevention against bacteria and algae in waterbeds.

Instructions for use:

1. The product is effective against a large number of bacteria and yeasts.
2. In vitro it is also effective against Trichophyton interdigitale.
3. The surfaces and materials to be disinfected must first be thoroughly cleaned.
4. When a detergent is used, it must be rinsed with clean water to remove excess detergent.
5. In cases where treated surfaces or materials may come into contact with food or beverages, they must be rinsed thoroughly with water after the product application period.
6. Minimum application time of 5 minutes.
7. For use in places where food and beverages are prepared, processed or stored and also in general use, the concentration of use is 8.0 ml per litre of water.
8. When used in hospitals, the product is recommended only for the following treatments: Surfaces (walls, floors and furniture) with the exception of the tuberculosis department, Isolettes, Kitchen surfaces and equipment.
9. Toilets and other sanitary facilities, Instrumentation (except stethoscopes and other fragile medical instruments). Dilution method: 1:125 (8 ml/l).
10. Minimum application time: 5 minutes. Caution: Use of this product may lead to the selection of certain resistant strains of bacteria.
11. Use against moss and lichen deposits.
12. To remove green deposits around windows and on equipment in empty greenhouses, water or brush thoroughly with a 5% solution of the product (5 L in 100 liters of water).
13. After a few days, you need to remove the dead moss and deposits by watering with a powerful jet of water and brushing.
14. It is not necessary to rinse immediately after using the product, since the product does not cause any side effects or dangerous fumes.
15. For this reason, the treatment can be carried out shortly before planting. To prevent the formation of green deposits around windows and on equipment in empty greenhouses: Water the already clean parts of the windows with a 5% solution of the product (5 L in 100 liters of water).
16. Since the product does not cause dangerous side effects and leaves very little residue, rinsing is not necessary.
17. By applying the product in this way, no deposits will form for several months.
18. When windows are cleaned by hand, a 3% solution is sufficient (300 ml in 10 liters of water).
19. To remove and prevent green deposits on walls, roofs, sidewalks, tiles, garden furniture, spray with a jet of water, brush and wash with a 5% solution (500 ml in 10 liters of water).
20. Do not rinse. Do not spread on plants. Application for waterbeds to prevent the growth of algae and bacteria in waterbeds, to prevent stagnant water, add the product to clean water at a rate of 100 ml per 300 litres of water (15 ppm of active ingredient).
21. When filling the mattress with water, the product must be added in the same proportion.
22. The product is no longer effective when it has come into contact with soap or detergents.

Packaging:

5 Liters / 20 Liters / 210 Liters.

FAQ - Frequently Asked Questions

1. Do you need to rinse after application?
   No, except on certain metallic materials or sensitive areas. The product works on its own, and rain gradually washes away the residue.
2. How long does it take to see results?
   The first effects usually appear within 12 to 48 hours. Complete cleaning may take a few days, depending on the weather and the intensity of the foam.
3. Can Zeptreet 100 be used on a natural slate roof?
   Yes, the product is compatible with most materials, including natural or artificial slate.
4. Is the product harmful to plants?
   It can be harmful on direct contact. Protect or thoroughly water nearby plants before and after application.
5. Can you walk on the surface after treatment?
   Yes, once the surface is completely dry. Be careful, it may be slippery during application.
6. Does Zeptreet 100 prevent regrowth?
   Yes, regular application (1 to 2 times/year) helps to keep surfaces clean in the long term.
7. Is it suitable for professionals?
   Yes, it is widely used by roofers, cleaning companies, landscape gardeners, local authorities and industries.