Anti-M Guard 2 in 1 - Concentrated anti-fungal and waterproofing treatment - Guard Industrie

Anti-M Guard 2 in 1 - Concentrated anti-fungal and waterproofing treatment - Guard Industrie

Anti-M Guard 2 in 1 is a 2 in 1 treatment product, it destroys green deposits , lichens , fungi and waterproofs materials.
It is an anti-fungal and water-repellent treatment in one application.

Curative and preventive treatment, it requires no rinsing and provides a long-lasting effect.
It destroys all parasitic vegetation which is then eliminated by rain or by simple cleaning.
The waterproofing property protects the treated materials and thus limits the reappearance of micro-organisms.

Advantages

• 2 in 1 action: cleans and waterproofs
• Treats and protects in one application
• 2 hours without rain is enough: can be used in all seasons
• Ultra concentrated: 1L = 10L = 50m²
• Chlorine and solvent free
• Versatile, can be used on all surfaces and materials
• Does not alter the supports

Use

• All types of materials: natural or reconstituted stone, coating and rendering, concrete, fiber cement, terracotta, slates, wood, etc.
• Floors, facades and roofs
• Outside
• Recommended for terraces, driveways, fences, gables, tiles…

Implementation

Preparation of the support

1. If the surface is heavily invaded by green masses, brush or scrape before application.

Dilution recommendation

1. Concentrated product, do not use pure.
2. Dilute 1L of product for 9L of water.

Application

1. Always carry out a preliminary test before application to check the good penetration of the product and the appearance after complete drying (24 hours).
   In certain cases, the product when it acts can cause an orange/brown color on the support.
   This phenomenon is normal and eventually disappears the days following application.
2. Apply uniformly in dry weather to a dry or slightly damp surface, spraying until the surface is saturated.
   Thoroughly impregnate the surface to be treated, it is necessary that the product penetrates deeply for a better result.
3. Time required without rain after application: 2 hours.
4. Do not rinse and leave the product to act.
5. The elimination of micro-organisms is gradual and can take several weeks to several months depending on the level of contamination and the type of germ.
   To remove residue more quickly, it is possible to use a high pressure cleaner.

Application tools

Apply with a low pressure garden sprayer.

Consumption

4 to 5 m² / liter of ready-to-use product.
Values given for information only.

Yield

Diluted: 1L of concentrated product = 10L of ready-to-use product, i.e. 50 m² treated.

Conditioning

5 L and 20 L.

Formerly: Green Guard Anti-Deposit 2 in 1 - Concentrated fungicide and water repellent - Guard Industrie