Jet Clean - Foaming vehicle cleaner - Zep Industries

Jet Clean - Foaming vehicle cleaner - Zep Industries

Powerful cleaning for brushless cleaning of all types of vehicles Immediately and effectively removes static film , exhaust gases , dirt, mud, grease and slime.
Forms a large amount of stable foam which significantly increases contact time .

Properties :

• Very powerful cleaner for “Brushless” cleaning of all types of vehicles.
• Cleans the bodywork without scrubbing or brushing and degreases truck tarpaulins (nylon or fabric) using a high pressure cleaner.
• Immediately and effectively removes static film, exhaust fumes, dirt, mud, grease and silt.
• Can be diluted with hard or soft water, softens water (NTA).
• Jet Clean is very concentrated and can be diluted up to 1:400.
• Forms a large amount of stable foam which significantly increases contact time.
• The foam is easy to rinse off using a pressure washer and does not leave a film.
• At the prescribed dilution the product does not attack paint, glass, plastic, aluminum surfaces or truck covers.
• Does not produce toxic fumes.
• Free from phosphate and EDTA.
• Fully biodegradable.

Applications:

Transport companies, garages, gas station, car rental companies, taxi companies, bus companies, fire stations, police, etc.

Manual :

1. Jet Clean is always diluted in water.
2. Minimum 0.2% and maximum 2% depending on dirt.
3. Shake the mixture well before use.
4. Apply evenly to the surface to be cleaned using a sponge, spray or high pressure cleaner (with or without foam cannon), always working from bottom to top.
5. Leave to act for a few minutes, rinse with pressurized water (minimum pressure: 75 bar, minimum water flow: 8 l/min).
6. Never let the product dry before rinsing (if necessary, for a large vehicle, carry out the treatment in two parts).
7. For car washes with brushes for company vehicles, a dilution of 0.1% to 0.5% is used.

Conditioning :

22kg / 250kg / 1100kg.