Everclear 505 liquid - PU adhesive - Akemi

Everclear 505 liquid - PU adhesive - Akemi

Liquid 2-component PU adhesive , generally no color change on marginal areas, UV-stable, almost no yellowing, solvent-free.

Features :

• Can be sanded and polished after approx. 6 h (20°C), can be colored with AKEMI polyester dyes or with polyester concentrates, mixing ratio 4:3.
• For high-quality consolidation of cracks, filling of pores and improvement of the surface of clear, white or transparent-crystalline natural stone such as Onyx, Thassos, Sivec, Carrara marble, Statuario in horizontal .
• Due to its low tendency to yellow, the product can be used indoors and outdoors without restriction.

Use :

1. The surfaces to be treated must be clean, dust-free and completely dry.
2. Preheated stone surfaces (max. 60°C) slightly reduce working and hardening time, but increase penetration capacity.
3. Mix component A and component B homogeneously in a mixing ratio of 4:3 (by weight).
4. Coloring is possible by adding up to 2% of AKEMI Polyester Dyes / Liquid Concentrated Dyes or Spectrum Pastes.
5. The mixture is applied over the entire surface using a spatula.
   For larger cracks or more absorbent areas, apply multiple times.
   Continuous cracks must be sealed on the back before treatment.
6. The mixture can be worked for about 12 to 15 minutes (20°C), after about 6 hours the material can be sanded and polished.
7. Clean work tools immediately with AKEMI Universal Thinner.

Conditioning :

1900g