Marmorkitt 1000 S - Thick putty - Akemi

Marmorkitt 1000 S - Thick putty - Akemi

Thick putty , does not change consistency by agitation, keeps its stability even in case of high temperature.
For filling and gluing natural stone on vertical surfaces, for modeling corners and edges and for filling large holes.

Features :

• Good application on vertical surfaces thanks to its pasty consistency
• Fast hardening (10 to 20 minutes)
• Very good workability (sanding, boring, milling)
• Very good polishing ability
• Very good adhesion on natural stone, also at high temperatures (70 - 80°C, at low loading up to 100 - 110°C)
• Resistant to water, petrol and mineral oils

Use :

1. The bottom to be treated must be clean, completely dry and roughened.
2. The glue can be colored with AKEMI Polyester Dyes up to 5% max. ; Dilution is possible in any proportion with Marmorkitt Transparent extra liquid.
3. Add 1 - 4 g of white hardener to a quantity of 100 g of glue (1 g corresponds to approx. 4 - 5 cm taken out of the tube).
4. Thoroughly mix the two components; the mixture is then ready to use for 3 - 10 minutes (at 20°C).
5. After 10 - 20 minutes the treated parts can be processed (eg sanded, milled, drilled) resp. transported.
6. Heat accelerates and cold slows hardening.
7. Work devices can be cleaned with AKEMI NitroDiluant.

Conditioning :

• 150ml
• 1 liter