Flexifoil details and joints - Waterproofing adhesive - Aquaplan

Flexifoil details and joints - Waterproofing adhesive - Aquaplan

High quality solvent-free adhesive glue for bonding the Flexifoil EPDM membrane and watertightness of gaskets , accessories and profiles.

Thanks to its unique technology, this glue is very elastic, has high adhesion and is waterproof.
This glue can be applied both horizontally and vertically.

Benefits :

• High adhesion
• Super elastic and waterproof Solvent-free and odorless

Application :

To be used for bonding the FlexiFoil EPDM membrane on the FlexiFoil EPDM membrane, wood, concrete, stone, lead, bituminous roofing strips or on PIR insulation sheets fitted with a glass veil.

Manual :

1. Dust and degrease the support.
2. Apply Flexifoil Details & Joints using an applicator gun.
3. Jointing: apply Flexifoil Details & Joints 2 cm from the edge of the joint.
4. Accessories: Draw the outline of the accessory.
   Apply Flexifoil Details & Joints 2 cm inside the drawn contour and, depending on the accessory, around the drain and 2 cm on each side of the corners (for preformed corners).
   Place the accessory.
5. Roll the glue well and make sure that the product overflows slightly from the joint.
   Dispose of any excess quantity.
6. Bonding of the Flexifoil EPDM membrane:
   For small areas, you can apply this glue in strokes (every 50 cm) using an applicator gun. Compress well with a roller.

Conditioning :

• 290ml cartridge.
• Black.