Extreme flooring - Waterproof and stain resistant - Aquaplan

Extreme flooring - Waterproof and stain resistant - Aquaplan

Durable and water-repellent floor covering , for the protection of concrete floors against repeated loads due, in particular, to cars.

Prevents wear caused by hot tires and protects the floor against stains, grease and road salt.
Thanks to its special composition, this coating is water-repellent and can be easily cleaned with ordinary detergents.

Benefits :

• Wear-resistant flooring
• High resistance to repeated loads
• Protects against stains, grease and road salt
• Suitable for porous cement and concrete floors

Application :

For use on porous concrete floors, indoors and out.
Can be applied on cement floors, on concrete (garage or basement, for example), on stairs or on window sills.

Useful information:

• Do not apply at ambient temperature where the temperature of the substrate is below +10°C or above +30°C.
• Eco-friendly formula: EXTREME FLOORING contains no harmful solvents. By using this product you contribute to the respect of the environment.
• Clean the tools with water as soon as you are finished.
• For a new concrete floor, wait 3 months before applying the coating.

Manual :

1. Start by dusting and degreasing the support.
   Make it porous.
2. Remove any loose cement, paint residues, salts and mold with a wire brush.
3. Seal cracks and crevices with Stop-Leaks .
4. Rinse the prepared substrate with water and let it dry.
5. Apply 2 coats Floor Coating Extreme by brush or roller, at a rate of approximately 0.1 l/m²/coat.
   Dilute the first coat with 10% water to optimize adhesion. Once the first coat is completely dry, apply a second coat undiluted.
   Drying takes about 24 hours.
6. We advise you to wait 3 days before using the treated part again.

Conditioning :

• 1L and 4L.
• Gray concrete.