Rain Protect - Impregnation cream - Aquaplan

Rain Protect - Impregnation cream - Aquaplan

Solvent-free, odorless and colorless cream for protecting unpainted interior and exterior walls against driving rain and dirt.

Impregnation Cream penetrates deep into all porous substrates and forms a durable, vapor- permeable water- repellent barrier, which prevents water penetration and prevents frost damage and foam formation.
Thanks to the high concentration of the cream, the application of a single coat is sufficient for long-term protection.

Benefits :

• Colorless and vapor permeable.
• One coat is enough for long-term protection.
• Protects against driving rain and dirt.
• Environmentally friendly and safe to use.

Application :

For use on porous unpainted vertical exterior walls as well as on concrete, brick, plaster and sand-lime brick facades.

Useful information:

• Store in a cool place (max. 20°C) and protected from frost.
• Do not apply on a painted or cemented wall.
• Do not use IMPREGNATION CREAM in direct sunlight or if rain threatens within 4 hours.
• During the implementation and the drying, the temperature of the support and the ambient temperature must be 5°C min. and 25°C max.
• Protect nearby painted surfaces, sills, panes, glass, frames, cut stone (blue stone), etc. … against splashes.
  If necessary, remove these immediately with water.
• IMPREGNATION CREAM is suitable for almost all common facing bricks.
  However, more and more pigments are added to the facing bricks.
  Therefore, always carry out a preliminary test in an inconspicuous place to determine if the appearance of the bricks does not change in an undesirable way.
• Clean tools with water immediately after use.

Manual :

1. Dust the support.
   If the support is very dirty, clean it with a high-pressure cleaner.
2. Remove any paint residues and salt crystals using a stiff brush.
3. Fight green deposits, lichens and algae with the product STOP DEPOTS VERTS.
4. Seal cracks larger than 0.2 mm using a suitable colored mortar or putty.
   Repair joints in poor condition.
5. The substrate must be relatively dry.
6. Apply CREAM IMPREGNATION undiluted using a brush or roller from top to bottom.
   You need about 1 L per 6-8 m² per coat.
7. CREAM IMPREGNATION has a milky color but becomes completely transparent during drying.
8. Can be covered with acrylic paints.

Conditioning :

2.5L and 5L.