Aqua-Resist - Waterproof wall coating - Aquaplan

Aqua-Resist - Waterproof wall coating - Aquaplan

The coating forms a waterproof layer that prevents moisture from penetrating into your walls and thus protects them against moisture infiltration.
Even better: thanks to its unique composition, Aqua-Resist repairs and strengthens your dry or wet constructions after the application of a single coat.

The coating is easy to apply, has great hiding power and dries quickly.
In addition, Aqua-Resist has a long lifespan, resists dirt and is washable.

Benefits :

• Waterproof in 1 single layer.
• Washable and repels dirt.
• Adheres to damp substrates.
• Protects walls against moisture infiltration

Application :

For use on painted or unpainted exterior walls, brick, cement, masonry, fiber cement, concrete, roughcast, etc. Ideal for garage walls, as an alternative for a freestone facade base, for walls in contact with the ground, insulated walls around a building, garden walls, concrete posts, etc.

Useful information:

• AQUA-RESIST is composed of selected acrylic resins and solvents.
• Store in a cool place (max. 20°C) and protected from frost
• Do not apply if substrate or ambient temperature is below 5°C or above 35°C.
• Mix well before use and close carefully afterwards.
• Clean your tools with white spirit.

Manual :

1. Dust and degrease the support.
   Clean the support under high pressure in the event of heavy contamination.
   If necessary, remove any loose parts.
2. Fight against possible green deposits, lichens and algae with STOP GREEN DEPOSITS .
3. Seal cracks and crumbled joints with JOINT-EXPRESS or a coatable acrylic sealant.
4. The substrate may be slightly damp.
5. Mix AQUA-RESIST well before use.
6. Apply AQUA-RESIST in 1 coat by brush or roller at a rate of 0.75 to 1 l/m².
   Work from top to bottom.

Conditioning :

• 0.75L and 4L.
• Gray