FUGEX - Solvent-based cleaner for stripping epoxy joints - Lithofin

This stripper gel quickly dissolves and removes excess and residue from mono or bi-component epoxy joints .

Packaging:
10 Items
€32.56Tax Included
€33.23- 2%

Volume discounts

QuantityYou SaveUnit price
23 %€32.23
34 %€31.90
55 %€31.57
1010 %€29.91
LIT 057-11-B
4001524005713

FUGEX - Solvent-based cleaner for stripping epoxy joints - Lithofin

The special cleaner contains highly effective and carefully selected organic solvents . They make it possible to quickly and safely remove the remains of one-component or two-component paver joint mortars .

This product does not contain acids and is therefore also suitable for surfaces such as concrete stone and limestone .

The gel consistency makes it easy to apply, but the product is still easy to rinse off with water.

Technical specifications :

  • Density: approx. 1.1g/cm³
  • Flash point: approx. 90°C (cc)
  • pH: na
  • Appearance: colorless, in gel form
  • Odor: characteristic
  • Solubility in water: emulsifiable

Application domain :

This product is applicable both indoors and outdoors on all ceramic and sandstone surfaces, natural stone such as granite, gneiss and quartzite and uncoated concrete stone.

Manual :

Application on single-component paver joint mortar:

  1. Start by moistening the surface well.
  2. Dilute the product with water and a dosage of approx. 1:5 and then distribute evenly and generously with a brush.
  3. Leave to act for approx. 20 minutes at a surface temperature of 20°C.
  4. Brush occasionally during the exposure time.
  5. Rinse thoroughly with clean water using a brush.

Yield: approx. 30 m²/l depending on the absorbency of the surface.

Application on two-component paver joint mortar:

  1. Apply the pure product on the dry surface. Distribute evenly and in large quantities using a brush.
  2. Leave to act for approx. 60 mins. (for very stubborn residues up to 2 hours) at a surface temperature of 20°C and brush occasionally.
  3. Then rinse thoroughly with clean water using a brush.

Yield: approx. 3 to 5 m²/l depending on the absorbency of the surface.

Please note: elements sensitive to solvents such as coated concrete stones, varnishes, sealants, plastics, rubber, eloxal, zinc, etc. must be protected.

Avoid product contact with grass and plants, water well before and after.

Lithofin
LIT 057-11-B
10 Items

Data sheet

Signal word
DANGER
Hazard statements
H314 – Causes severe skin burns and eye damage.
H335 – May cause respiratory irritation.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
 

Specific References

EAN13
4001524005713
There are no reviews for this product yet.

You might also like