X-Seal - Seal for everything and everywhere - Tec7

X-Seal - Seal for everything and everywhere - Tec7

X-Seal is an extremely flexible sealing kit based on MS hybrid polymers replacing any other seal.

Features :

• Extremely flexible and satin colored.
• Adheres to most building materials, even when wet.
• Safe and mildew resistant.
• Can be painted.
• Can be used indoors and outdoors.
• Extremely flexible sealing kit based on MS hybrid polymers replacing any other seal: painter's seal, sanitary seal, construction seal, glass seal, natural stone seal, concrete seal, etc.
• Easy to apply.
• The combination of superior adhesion and permanent elasticity guarantees stubborn joints.
• Perfectly resistant to bad weather, UV rays and temperature variations.

Application areas :

1. Natural stone kit, safe for all types of stone such as marble, granite, cut stone, most composite materials, concrete, masonry, window sills, countertops, sills, …
2. Kit for mold-resistant joints in sanitary areas and damp areas.
3. Joint for sealing connections and as an expansion joint in construction and industry.
4. Seal for glass and mirrors.
5. Joint between construction elements such as facades, frames, windows, panels, prefabricated elements, etc.
6. EC1935 Isega approval for food: suitable for use in the food and catering industries.
7. Hermetic seal in passive or almost energy neutral construction.
   Very low emissions: Emicode EC1 Plus / VOC emission class A +.

Technical specifications:

• Base: hybrid MS polymers.
• Odor: neutral.
• Shore-A hardness (DIN 53505): 32.
• Elastic modulus at 100% elongation (DIN 53504 S2): ± 0.6 N/mm².
• Elongation at break (DIN 53504 S2): ± 600%.
• Elastic recovery (DIN EN ISO 7389): > 60%.
• Tensile strength (DIN 53504 S2): ± 1.6 N/mm².
• Movement capacity: 20%.
• Consistency (DIN EN ISO 7390): stable up to ≤ 3 mm.
• Hardening: by polymerization under the influence of air humidity.
• Application temperature: +5°C to +40°C.
• Working time at 23°C/50%RV: max. 30 mins.
• Hardening at 23°C and 50% RV: after 24h: ± 2.5 mm; after 48h: ± 3.5 mm.
• Shrinkage after curing (DIN EN ISO 10563): ≤ 3%.
• Can be painted: yes.
• Density at 23°C and 50% RH: 1.48 ± 0.05 g/cm³.
• Thermal resistance: from - 40°C to + 90°C.
• Chemical resistance:
  • Good: water, aliphatic solvents, diluted oils, fats, bases and organic acids.
  • Medium: esters, ketones and aromatics.
  • Bad: concentrated acids and chlorinated hydrocarbons.
• Weather resistance: very good.
• Shelf life: 18 months, dry and cool in original packaging.
• Frost resistant during transport down to -15°C.

Conditioning :

310 ml cartridge: White, Black, Concrete Gray and Anthracite.