Renov'Toiture - Waterproof roof protection - Aquaplan

Renov'Toiture - Waterproof roof protection - Aquaplan

Waterproof roof coating , reinforced with microfibers, for the seamless repair and renovation of old and damaged gutters and bituminous roofs.
The product penetrates deep into the pores , seals small inequalities and crevices and perfectly matches the shape of the support.

After drying, it forms a well-adherent and slightly elastic layer which protects the existing roof coating against atmospheric pollution and temperature variations.
The lifespan of bituminous roofs is thus extended by at least 3 years.
Can be applied in freezing weather.

Benefits :

• Extends the life of your existing roof.
• Optimal adhesion with bituminous membranes.
• Reinforced with synthetic fibers for immediate waterproofing.
• Optimal expansion and contraction without cracking.
• Insensitive to temperature, so it is possible to carry out repairs even in freezing weather.
• Anti-corrosion action: protects the metal against underground humidity.

Application :

Can be used on all types of bituminous products (roofing).
Can also be applied to wood, masonry, cement plaster, concrete and metal.
Also protects buried metal objects and car underbody from corrosion.

Useful information:

• RENOV'TOITURE is made of bitumen and elastic synthetic fibres.
• Do not use at an ambient temperature below +5°C or above +35°C.
• In the event of green deposits on the roof to be renovated, it is advisable to first remove them using STOP GREEN DEPOSITS or AUTONETTOYANT-BIO .
• With RENOV'TOITURE, you can later decide to install a bituminous membrane. Depending on the type of membrane you choose, you can torch it or stick it with ROOFIX .
• Can also be used on a pitched shingle, roofing or metal roof. In this case, apply several thin coats of RENOV'TOITURE.
• Clean your tools with white spirit.

Manual :

1. Dust and degrease the support first.
2. Repair blowholes, cracks and crevices with the Repair Mastic or with the elastic SBS Roofing Mastic , possibly reinforced with the tear-proof polyester Anti-Crack tape.
   Leave to dry sufficiently (approx. 1 week) before continuing.
3. Clean the substrate and impregnate it with a Roofprimer quick-drying adhesive varnish to ensure optimal adhesion.
4. Apply 2 crossed coats of RENOV'TOITURE with a brush at a rate of +/- 0.5 kg/m²/coat with an interval of 24 hours.
   In the last, still wet layer, slate flakes can be scattered as additional UV protection.

Conditioning :

• 1L, 4.8L and 12L.
• Black.