UltimaFloor - PU Varnish for Heavy Traffic - Owatrol Pro

UltimaFloor - PU Varnish for Heavy Traffic - Owatrol Pro

A high- performance , water -based matte varnish that has excellent filling power with optimal mechanical and chemical resistance .

Properties :

• Water-based polyurethane to be mixed with its UFL hardener.
• Excellent filling power.
• Optimal mechanical and chemical resistance, including to ammonia-based products.
• Protects and enhances the wood grain.
• Non-slip.
• Insensitive to light. Does not yellow over time.
• Colourless and faint odor.
• Beautifies and protects interior stairs, parquet floors and flooring.
• Ideal for:
  • Heavy traffic: corridors, staircases, dining rooms,…
  • Heavy traffic: offices, shops, classrooms, restaurants, museums, building lobbies, hotels,... and various places subject to environmental aggressions (food, cleaning products, etc.)
• Yield: Approximately 10 to 12 m2 per coat per litre.
  Yield may vary depending on the condition of the substrate, its impregnation, and the application equipment.

Application :

1. Apply a first even and even coat of Ultimafloor.
2. Perform 3 cross passes in one application by positioning yourself facing the light and starting from the opposite side of the door so as to progress towards it.
3. Start with the edges and then cover the entire surface, working in 2m x 2m sections.
4. Allow to dry for 4 hours depending on ambient conditions.
5. Proceed to ginning (grains no. 150 to 180) then dust thoroughly.
6. Apply the 2nd coat of Ultimafloor.
7. Do not exceed 12 hours between the application of the 2 coats.

Destinations:

Suitable for all wood species commonly used in this type of work.

Packaging:

4 L.

FAQ - Frequently Asked Questions

1. Is UltimaFloor suitable for areas with very high traffic?
   Yes, UltimaFloor is designed for high-traffic areas, including public spaces, retail and professional zones.
2. Can it be applied to an old varnished parquet floor?
   Yes, provided that the old varnish is completely sanded down to the bare wood.
3. Is it suitable for exotic woods?
   Yes, UltimaFloor is compatible with exotic woods, provided they are properly degreased and prepared before application.
4. Is a primer necessary before application?
   In most cases, no primer is necessary. On very porous or exotic woods, a preliminary test is recommended.
5. How many coats should be applied?
   For residential use, 2 coats. For heavy-duty or professional use, 3 coats are recommended.
6. When can we put the furniture back?
   Light traffic after 24 hours. Full return to service and heavy furniture after 72 hours. Maximum resistance: 7 days.
7. Does the product yellow over time?
   No, its water-based polyurethane formulation guarantees excellent stability over time, without yellowing.
8. How to maintain a varnished parquet floor with UltimaFloor?
   Use a soft broom or vacuum cleaner, and clean with a special soap for varnished parquet floors. Avoid harsh or abrasive cleaners.