Parade Sealer - Pore Filler - Zep Industries

Parade Sealer - Pore Filler - Zep Industries

Aqueous emulsion acrylic copolymer formulated to seal and fill pores in concrete , terrazzo or all varnishes.
Particularly effective at correcting adhesion problems caused by oil .

Properties :

• Specifically designed for floor surfaces regularly treated with self-gloss emulsions or coated.
• Provides a clear, glossy coating, forms a protective varnish and fills pores, thus extending the life of floors.
• Increases the shine of the last wax coatings to be applied.
• Good base coat for applying wax.
• Designed to provide a non-slip layer.
• Can be applied with a "Floor Finish Applicator".
• Less than ideal soils appear better and cleaner after treatment with PARADE SEALER.

Applications:

Based on acrylic copolymers with metallic particles. To be used as a primer for porous floors in preparation for wax application.

Instructions for use:

1. For best results, remove all old layers with a Zep-Stripper (SPECIAL or DETSOL).
2. Rinse the floor thoroughly with clean water and let it dry.
3. Apply 1 or 2 coats of PARADE SEALER (depending on the type of soil and porosity).
4. Apply the 2nd coat after at least 30 minutes.
5. If desired, one or more suitable Zep emulsions can then be applied.
6. Wipe floors regularly and remove them daily with DOSE EASY 13 or INOVSOL.
7. Keep the floor dust-free.

Packaging:

1 Gallon.

FAQ - Frequently Asked Questions

1. What is the purpose of a pore filler?
   It helps to block excessive porosity of a surface in order to facilitate the application of a sealant and to obtain a more even and durable result.
2. Can I use it alone as protection?
   No, Parade Sealer is not a sealant. It serves only as a preparation and must be covered with a protective finish.
3. Is it compatible with all types of sealants?
   Yes, it is compatible with most water-based or solvent-based sealants, but it is recommended to do a preliminary test on a small area.
4. Should multiple coats be applied?
   One coat is usually sufficient. On very porous surfaces, a second coat may be necessary.
5. Can I use it outdoors?
   Yes, the product is designed for indoor and outdoor use, provided that the drying time is respected and moisture is avoided during application.
6. What is the waiting period before applying the sealant?
   Generally 1 to 2 hours, once the surface is dry to the touch. Do not exceed 24 hours.
7. Does the product change the appearance of the surface?
   No, it is designed to be invisible, without any noticeable change in appearance.
8. Can it be used on a surface that has already been treated?
   No, it should only be applied to a porous and untreated surface.