Parasilico Prestige Color T - Neutral silicone sealant on transparent oxime base - DL Chemicals

Parasilico Prestige Color T - Neutral silicone sealant on transparent oxime base - DL Chemicals

Neutral silicone sealant on transparent oxime base, multifunctional 4 in 1 for facades, glazing, sanitary ware and natural stone.

Also suitable for joints in swimming pools provided a primer is applied.

Properties :

• 1-component neutral silicone
• 4-in-1 silicone for facades, glazing, sanitary ware and natural stone
• Permanent elasticity
• Very easy to apply
• Good resistance to low and high temperatures
• Mold resistant
• Very good adhesion to almost all building materials
• Available in over 40 trendy colors
• High color stability
• Very good UV resistance
• Meets FDA Code 21 §177.2600 (e) requirements for food contact
• Very good resistance to aging and weathering

Applications:

• Sealing of glazing joints.
• Waterproofing of connection joints and expansion joints on facades, interior walls, joints between the door frame and the wall.
• Joints in contact with natural stone for thresholds, worktops, window sills, tiles, borders, etc. in cut stone, marble, granite, etc.
• Sealing the joints around the mirrors.
• Waterproofing joints around swimming pools.
• Sealing joints in swimming pools (only for colours on a transparent base (T) provided that a primer is applied).
• Outdoor and indoor use.
• Expansion joint in walls
• For all sanitary applications, for repointing in humid spaces such as bathrooms, showers, kitchens and cold rooms.

Instructions for use:

1. Preparation :
   • Do not apply in confined spaces. It is important to ventilate areas well during application and curing.
   • Surfaces must be solid, dry and free from dust and grease.
   • If necessary, degrease with Parasilico Cleaner, MEK, alcohol or ethanol.
   • The user must ensure that the product used is suitable for their use. If necessary, contact our technical department.
2. Primary:
   • Absorbent surfaces: Silicone Primer Porous Surfaces (transparent, drying approx. 60 min.).
   • Non-absorbent surfaces: Silicone Primer Non-Porous Surfaces (transparent, drying approx. 60 min.).
   • The use of a primer may be necessary on very porous surfaces, in the case of difficulty in adhesion or in demanding conditions of use.
3. Laid :
   • Apply the product from the cartridge/pouch with a manual or pneumatic caulking gun.
   • The size and shape of the gasket are very important. Avoid thin gaskets.
   • Do not apply thermal, mechanical or chemical loads until completely cured.
4. Joint dimensions:
   • Joint widths allowed from 5 mm to 30 mm
   • Joints up to 10 mm wide: the joint depth must be equal to the joint width. Joints wider than 10 mm: the joint depth = (joint width/3) + 6 mm.
5. Smoothing:
   • Smooth before skin formation with Perfect Joint Tooling Liquid Smoothing Agent and/or with the Perfect Joint Tool Smoothing Paddle
   • Avoid getting the tooling agent on the surface before applying silicone. Silicone will not adhere to a wet surface.
6. Cleaning:
   • To clean tools and surfaces and remove residue before curing, use Parasilico Cleaner, Multi-purpose Super Cleaner or Cleaning Wipes. Cured residue can be removed with Silicone Remover.
   • After hardening, mechanically remove the hardened elements.
7. Repair :
   • With the same product.

Packaging:

300 ml cartridge.

Standard RAL color chart:

• Shades of red:

• Shades of blue:

• Shades of green:

• Shades of gray:

• Shades of white and black: