Parasilico AM85-1 T - Neutral oxime silicone sealant on transparent base - DL Chemicals

Parasilico AM85-1 T - Neutral oxime silicone sealant on transparent base - DL Chemicals

Neutral oxime silicone sealant on a transparent base, for all connection and expansion joints in construction.

Adheres perfectly without primer to almost all building materials. MEKO-free.

Properties :

• Neutral oxime curing, 1-component weatherseal silicone sealant
• Permanent elasticity
• Very easy to apply
• Excellent adhesion to almost all building materials
• Very good UV resistance
• Very good resistance to aging and weathering
• Without MEKO

Applications:

• Sealing of glazing joints.
• Sealing of connection joints and expansion joints on facades, interior walls, joints between the door frame and the wall...
• Sealing of sealing joints in building and construction.
• Applications with a permanent water load, provided that a primer is used.
• Expansion joint in walls

Instructions for use:

1. Preparation :
   • Do not apply in confined spaces. It is important to ventilate the areas well during application and curing.
   • The surfaces must be solid, dry, and free from dust and grease.
   • If necessary, degrease with Parasilico Cleaner , MEK, alcohol or ethanol.
   • The user must ensure that the product used is suitable for their intended purpose. If necessary, contact our technical support.
2. Primary schools:
   • Absorbent surfaces: Silicone Primer Porous Surfaces (transparent, drying time approx. 60 min.).
   • Non-absorbent surfaces: Silicone Primer Non-Porous Surfaces (transparent, drying time approx. 60 min.).
   • The use of a primer may be necessary on very porous surfaces, in cases of poor adhesion or under demanding conditions of use.
3. Laid :
   • Apply the product from the cartridge/pouch with a manual or pneumatic caulking gun.
   • The size and shape of the joint are very important. Avoid thin joints.
   • Do not apply thermal, mechanical or chemical loads before complete hardening.
4. Joint dimensions:
   • Allowable joint widths from 5 mm to 30 mm
   • For joints up to 10 mm wide: the joint depth must be equal to the joint width. For joints wider than 10 mm: the joint depth = (joint width/3) + 6 mm.
5. Smoothing:
   • Smooth before skin formation with Perfect Joint Tooling Smoothing Agent Liquid and/or with the Perfect Joint Tool Smoothing Palette
   • Avoid getting any tooling agent on the surface before applying silicone. Silicone will not adhere to a wet surface.
6. Cleaning:
   • To clean tools and surfaces and remove residue before hardening, use Parasilico Cleaner , Multi-purpose Super Cleaner , or Cleaning Wipes . Hardened residue can be removed with Silicone Remover.
   • After hardening, mechanically remove the hardened elements.
7. Repair :
   • With the same product.

Packaging:

300 ml cartridge: Transparent grey, Transparent, Moss green, White aluminum, Snow white, Pure white, Signal white

600ml pouch: Transparent gray, Transparent

FAQ - Frequently Asked Questions

1. Is the sealant really transparent?
   Yes, it becomes almost transparent after polymerization, ideal for discreet joints.
2. Can it be used in a humid environment such as in a shower?
   Yes, it is perfectly suited for sanitary joints and is very resistant to moisture.
3. Does it adhere to PVC or aluminum?
   Yes, it offers excellent adhesion on non-porous surfaces, including PVC, aluminum and glass.
4. Can it be used on natural stone?
   No, this sealant can stain natural stone. Use a neutral silicone sealant specifically designed for stone instead.
5. Is it compatible with mirrors?
   Yes, because it is a neutral oxime and does not cause corrosion of the mirror's backing.
6. How long does it take to dry?
   Touch dry in approximately 30 minutes. Polymerization: 2–3 mm per 24 hours. Full curing: a few days.
7. Can it be painted?
   No, like all silicone, it cannot be painted over.
8. What is its UV resistance?
   Excellent, it is designed for indoor and outdoor use.
9. Is a primer required to use it?
   In most cases no, but a primer can be useful on difficult surfaces.