Reacid 1 - Descaler for food equipment - Réalco

Reacid 1 - Descaler for food equipment - Réalco

Reacid 1 is a professional descaler designed for equipment (dishwashers, circuits, bain-maries, etc.) in food processing facilities . It is a non-volatile solution and easy to use.

Properties :

• Increased performance on tartar.
• Mineral acid (phosphoric), weak and food grade.
• Economical dosage thanks to the concentrated formula.

Applications:

Suitable for equipment and machinery, floors and surfaces.

Instructions for use:

VIA SPRAY, recommended dosage from 50% to pure:

1. Spray the solution onto the surface to be treated.
2. Leave to act for 10 minutes.
3. Rinse with clean water.
4. Repeat the operation if necessary.

CIP, recommended dosage of 1 to 5%:

1. Dilute the product according to the level of limescale buildup.
2. Leave to circulate for 10 to 30 minutes.
3. Rinse with clean water.

SOAKING, recommended dosage of 1 to 10%:

1. Dilute the product according to the dosage.
2. Apply the solution.
3. Leave on for 30 minutes to 1 hour.
4. Rinse with clean water.

Packaging:

5 Liters.

FAQ - Frequently Asked Questions

1. Is Reacid 1 compatible with stainless steel?
   Yes, Reacid 1 is perfectly suited for stainless steel surfaces. It cleans and descales effectively without damaging them when used according to the recommendations.
2. Can Reacid 1 be used in a CIP system?
   Yes, Reacid 1 is designed for clean-in-place (CIP) circuits, for tanks, pipes, heat exchangers, etc.
3. Is the product suitable for food processing machines?
   Absolutely, its formulation is designed for the maintenance of equipment in contact with food.
4. What is the recommended dilution?
   The dilution varies depending on the application (often between 2% and 10%). Exact values can be found in the Réalco technical data sheet. For heavily encrusted deposits, a higher concentration may be necessary.
5. Can it be used on aluminum?
   No, like all acidic descalers, it is not recommended for use on aluminum, copper, marble, or limestone surfaces.
6. Does Reacid 1 leave an odor on equipment?
   No, when rinsed thoroughly, it leaves no residue or odor. Thorough rinsing is essential.
7. Is it dangerous for the user?
   This is an acidic product, therefore potentially irritating or corrosive. Use personal protective equipment (PPE): gloves, goggles, appropriate clothing.
8. Can it be used for household machines?
   It is primarily intended for professional use. For domestic use, a gentler product is recommended.