Aerorust - Glossy Protective Rust-Resistant Coating - Zep Industries

Aerorust - Glossy Protective Rust-Resistant Coating - Zep Industries

Offers both durable corrosion protection and a high-coverage topcoat .
Applicable directly to any rusty surface.

It penetrates rust quickly.
Long-lasting protection : over 1000 hours of salt spray testing successfully passed.

Properties :

• "2 in 1": Aerorust offers both durable corrosion protection and a high-coverage topcoat.
• Applicable directly to any rusty surface.
• Can be applied without a primer.
• Penetrates quickly into rust: remarkable wetting of the substrate.
• Long-lasting protection: over 1000 hours of salt spray testing successfully passed.
• Utilizes VCI technology, the cutting-edge vapor phase corrosion inhibitor technology, developed to meet the extreme requirements of the aeronautics and aerospace industries.
• Resistant to weathering, gasoline and various emissions.
• High resistance to temperature differences.
• Impeccable appearance of the painted surfaces.
  Very high gloss color.
• Low in solvent: Low odor and environmentally friendly.
• Suitable for indoor and outdoor use.
  Free from chlorinated solvents.

Applications:

VCI: Electrically pre-charged particles and special resins containing antioxidant pigments are deposited like a protective film over the rust.
In addition, the presence of water-repellent additives prevents the penetration of moisture or aggressive substances.
Anti-corrosion coating and finishing paint, can be used on oxidized or unoxidized iron, steel, copper, brass, aluminum, on old synthetic paints, on wood, glass, stone.

Instructions for use:

1. In all cases, degrease, rinse and dry the surface.
   On a rusty surface, remove loose rust using a wire brush.
2. Apply preferably between 15 and 25°C.
3. Shake the aerosol can well before application.
4. Spray from a distance of 25 cm onto the surface to be protected.
5. Perform a minimum of 2 cross passes.
6. After spraying, purge the valve by turning the aerosol upside down, spraying until only gas escapes.
7. It is advisable to lightly sand bare and smooth metal surfaces.
8. Pre-drying cleaner: water.

Packaging:

400 ml: Black, Blue, Green, Grey, Red, White and Yellow.

FAQ - Frequently Asked Questions

1. Can Aerorust be applied to a surface that is already rusty?
   Yes, but it is recommended to remove any loose rust beforehand to ensure better protection. The product stabilizes light corrosion and prevents its progression.
2. Is the coating visible?
   Aerorust leaves a glossy, transparent finish without changing the color of the metal.
3. Can it be used outdoors?
   Yes, Aerorust is designed to withstand harsh weather, humidity, and corrosive environments.
4. Does the surface remain sticky after application?
   No, once dry, the film is non-sticky and stable.
5. Is it compatible with paint?
   Aerorust is not designed as a primer. It is best to paint beforehand or check compatibility by testing on a small area.
6. How long does the protection last?
   It depends on the exposure. In general, the film offers long-lasting protection, even in harsh conditions.
7. Can it be used on moving machines?
   Yes, but only when the machine is switched off and cooled down. Wait until it is completely dry before putting it back into service.
8. On which metals can it be applied?
   It is primarily intended for ferrous metals (steel, iron). For stainless steel or aluminum, a preliminary test is recommended.