HMK S246 - Anti-tache pour résine quartz - Moeller

HMK S246 - Anti-age spot for quartz - Moeller resin

Applications:

Apply HMK® S246 regularly and saturation using a soft brush or a roller foam on the surface clean, dry and naturally cold. On particularly absorbent surfaces, repeat application after 30 minutes approximately. The HMK® S246 surplus must be wiped carefully before drying with a paper towel. In the event of inadequate wiping, dark spots and streaks can appear.

Ascharacteristics:

HMK® S246 reduces the penetration of water, dirt, oils and greases. Stains is greatly reduced and the cleaning and maintenance are facilitated. The action against water, oils and fat depends on the absorption of the support. Plus HMK® S246 will have penetrated into the holder, best will be the stain effect. On the acid-sensitive surfaces, matte traces may appear under the effect of the wine, cola, orange juice; These traces will be however much more attenuated than on a surface treated and easier to clean. HMK® S246 resists UV rays and does not yellow. Gas exchange inside the bracket is little changed. The residual film after drying is without danger to the health and food (laboratory test). The color of the media may be slightly increased.

Consumption:

According to the support and the surface, about 20-40 m² / litre.

Packaging:

• 250 ml - Tin Tin
• 1 litre bottle Tin