MP90 ECO XTREME - Extreme water and oil repellent protection - Fila

MP90 Eco Xtreme - Extreme water and oil repellent protection - Fila

MP90 ECO XTREME is an eco-compatible water and oil repellent protector with a natural effect for natural stones .

It is ideal for polished porcelain stoneware, marble , granite , natural and agglomerate stones as well as cement .

Benefits :

• Product with very low VOC content and low environmental impact.
• Free from hydrocarbon solvents: ecological treatment.
• Being water-based, it supports residual moisture situations and therefore application can be carried out 24 to 48 hours after the initial wash for rapid treatment.
• Application in a single layer: apply the product and rub the surface until completely absorbed.
• Does not form a film or yellow.
• Ideal for protecting tables and worktops in kitchens and bathrooms.
• Application conditions: Temperature = 20°; Humidity

Features :

• Natural effect water and oil repellent protector.
• The best ecological protection against stains for porcelain stoneware, natural stone, marble and granite in polished, patinated, brushed, matte finish.
• Reduces the absorption of the material without altering its aesthetic appearance.
• Waterproofs, protects and facilitates cleaning.
• Also ideal for joints, cracked ceramics, grit, resin marble, tombstones.
• Also suitable for the treatment of cement tiles and reconstituted stones.
• Has anti-graffiti properties: protects the surface and allows easy removal of graffiti when cleaning.
• Water and oil repellent: prevents the absorption of common stains of oily and watery origin.

Manual :

No dilution, the product is ready to use.

Shake before use. For materials with a matte finish (natural stone, terracotta, agglomerates, cement tiles): On the dry and clean surface, apply MP90 ECO XTREME with a brush or a fleece-type cloth uniformly and continuously, also impregnating the joints. Before the product dries, remove any residue by dabbing with a clean cloth. On highly absorbent materials, apply in two coats 20 minutes apart.

For polished porcelain stoneware, natural stones, agglomerates with a polished finish: On the dry and clean surface, apply MP90 ECO XTREME, completely impregnating the material and the joints with a brush or a fleece-type cloth. Before the product dries (approximately 10-15 minutes), rub with a microfiber cloth soaked in the same product to promote its penetration. Then dry with a clean cloth. To speed up operations, it is possible to use a single brush.

To complete the treatment phases with the finish: For porous materials such as natural stones, reconstituted stones, agglomerates and cement tiles, laid indoors, it is possible to apply a finishing wax chosen in depending on the material and the desired effect (MATT, SATIN, CLASSIC, LONGLIFE). The surface can be walked on after 2 hours. The water and oil repellent protection is effective after 24 hours.

Conditioning :

• 375ml
• 1 litre
• 5 liters

Yield :

• Polished porcelain stoneware : 30-50 m²/L
• Marble/Polished granite : 20-30 m²/L
• Polished stone : 10-20 m²/L

Yields are indicative and per layer applied.

PS: FILA MP90 Eco Plus had already been replaced by the Stone Protect product which was, in turn, replaced by the Fila MP90 ECO XTREME.