Anti-graffiti - Akemi

Protects facades , buildings , monuments etc., anti-graffiti consists of absorbent mineral materials, such as natural and artificial stone, concrete , brick.

Packaging:
€51.60Tax Included

Volume discounts

QuantityYou SaveUnit price
67 %€47.99
AKE 10890
4004208108908

Anti-graffiti - Akemi

Protects facades , buildings , monuments etc., made of absorbent mineral materials, such as natural and artificial stone, concrete , brick.
Graffiti , traces of paint and markers are easily removed thanks to the aqueous emulsion applied as a protective layer.

Features :

  • weather resistant
  • Steamable
  • Does not turn yellow
  • Non-sticky surface
  • Rejects water and paints
  • Very little color intensification
  • Graffiti can be easily removed using a hot water cleaner
  • Yield: approx. 2 - 10 m²/litre.

Use :

  1. Cleaning: The surface must be clean, completely dry and free of all coat residues.
    Rinse well with water very carefully after these treatments and wait for complete drying before applying the protective product.
    Usually a minimum of about 1 to 2 days at best drying is required.
  2. Application on sample: it is recommended to apply the product on a surface of 1 to 2 m² in order to test the effectiveness of the product, to judge the appearance of the treated object (darkening of the shade) and to determine the quantity of the product needed.
  3. Shake before use.
    The product is applied 2 times, undiluted, depending on the porosity of the support and on very porous stones 3 times, with an interval of 15 to 30 minutes between two coats, without waiting for the product to dry.
    Apply with a brush or a low pressure sprayer (max 1 bar).
    Leakage of the product must be avoided.
  4. Preferably apply at room temperature or between 10 and 25°C.
    Avoid direct sunlight.
  5. Treated surfaces must be protected from rain or any form of humidity for a minimum of 5 hours after application.
  6. Brushes, rollers, containers can be easily cleaned with water.
  7. Graffiti can easily be removed with hot water or a hot water cleaner without any additional agent (20 - 50 bar, 120 - 140°C) at a distance of approximately 10 - 15 cm.8.
  8. So that the cleaning water loaded with paint particles does not damage the floors, we recommend applying a fine fleece flush with the treated walls.
  9. After the anti-graffiti cleaning, renew the protection.

Conditioning :

1L and 5L.

Akemi
AKE 10890

Data sheet

Signal word
WARNING
Hazard statements
H317 – May cause an allergic skin reaction.
Hazard pictogram
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
 

Specific References

EAN13
4004208108908
There are no reviews for this product yet.

You might also like