Primaire Guard Spécial Béton - Primer for concrete - Guard Industrie

Primaire Guard Spécial Béton - Primer for concrete - Guard Industrie

Guard Primer is a product intended to be used as a primer before any application of two-component products from the Guard Industrie range.

Primer Guard facilitates adhesion through its ability to attach strongly to the material.
It thus ensures the perfect hold of two-component products.

Advantages

• Very strong adhesive power
• Impregnation product, lets the treated material breathe.
• Essential for the adhesion of two-component products.
• Colorless.
• Ready to use and easy to use.
• Non-flammable.

Use

• All types of concrete: common, reinforced, fiber-reinforced, high performance (BFUHP, GRC, etc.)
• Facades
• New or old
• Exterior and interior

Implementation

Preparation of the support

• Always apply the product on a clean, dust-free, degreased and dry surface.
• Sand the rough edges of the support if necessary then dust the support.
• Rinse the entire surface thoroughly with a high pressure cleaner, preferably with hot water.

Application

1. Use the product in its pure state: do not dilute.
2. Shake the packaging well for one minute before use and carry out a preliminary test.
3. Apply in one pass from bottom to top.
4. It is imperative that Primer Guard has a tacky effect when pressed with a finger.
   Otherwise, apply a new coat.
5. Primer Guard must remain dust free for the first 3 hours following application.
6. Apply the two-component product within 4 hours to 48 hours following the application of Primer Guard.

Application tools

Apply by roller or air-assisted sprayer.

Consumption

8 to 15 m²/L.

Conditioning

5 L and 25 L.