Aussie-trol - Cell Activator for Pouring - Owatrol

Aussie-trol - Cell Activator for Pouring - Owatrol

AUSSIE-TROL is an ideal cell activator for your acrylic pouring paints. This water-based additive will allow you to multiply and vary the shapes and patterns of your creation.

This cell activator modifies the flow and smoothness properties of acrylic paints. This product can be used in conjunction with our FLOETROL product, which promotes color separation.

Properties :

• It makes it easier to spread the paint on the canvas.
• Improves the color gradient.
• The color, opacity, and texture of the colors are preserved.
• Excellent color separation.
• Optimizes the formation of cells and networks.
• Also works with products containing special pouring additives.

Application :

1. On the surface chosen to receive the decoration, first pour the base: "cushion" paint.
   This paint should be fluid but not too runny; it will act as a carrier for the colors to flow. We recommend a standard white acrylic paint. This paint should not contain FLOETROL .
2. Pour the colored paints containing FLOETROL onto this cushion as explained in the previous paragraph. They can all be poured in the same place or in various positions, but on top of the white cushion.
3. To optimize the effects, vary the shapes and cell sizes, and further enhance color interactions, pour the paint + AUSSIE-TROL mixture last. Pour it over each area where the paint + FLOETROL mixtures have been applied. The AUSSIE-TROL will allow for better cell distribution and greater freedom in creating new shapes. We recommend using a paint of the same color as the cushion for mixing with the AUSSIE-TROL.
4. Blow through a straw, using your mouth, in short bursts at the "islands" of color, from the center outwards (towards the white cushion). The colors slide and spread apart, the cells appear.
5. For the next step, let your creativity and imagination run wild. Continue blowing, rotating, creating wave or rocking motions, moving the paints and the cushion as you wish to finish your work.
6. Depending on the type of acrylic paint used and the mixing ratios chosen, the drying time may be significantly slowed, and the surface hardness may even be altered. This can make the paint fragile and leave marks when touched.
7. This phenomenon can be limited by using a surface varnish. Furthermore, a finishing varnish will help to even out the gloss.
8. Be careful when finishing the painting with a surface varnish; if the varnish is too rigid or brittle, there is a risk of cracking. To ensure the paint dries completely, we recommend a long drying time (at least one week) before applying varnish.

Destination :

• Additive for water-based acrylic paint

Packaging:

0.5 L.

FAQ - Frequently Asked Questions

1. Does Aussie-Trol replace a pouring medium?
   No, it's an additive used in conjunction with a pouring medium. It should not be used alone.
2. How many drops should be added?
   In general, 1 drop for fine cells, 2 drops for medium cells and 3 drops for large and very visible cells.
3. Can it be used with all brands of paint?
   Yes, Aussie-Trol is compatible with the majority of acrylic paints on the market.
4. Do the cells disappear when they dry out?
   No, the product is formulated to maintain cell structure once the paint is dry.
5. Is it dangerous or smelly?
   The product gives off little odor and can be used indoors, but it is advisable to work in a ventilated room as with any paint.
6. Do we need to use a blowtorch?
   It's not mandatory, but it greatly increases the appearance of cells.
7. Can the artwork be varnished once it is dry?
   Yes, absolutely. All Owatrol varnishes are compatible and provide long-lasting protection for your creation.