Primisol - Surface stain masking print - Owatrol

Primisol - Surface stain masking print - Owatrol

Water- based matte white primer designed to isolate and mask light surface stains .

Properties :

• Effective on light traces of soot, marker, carbon black, halos, humidity.
• Evens out coherent stained walls, ceilings and doors and prevents the reappearance of stains by migration into the finishing film.
• Limits the tannic rise of wood.
• Excellent hiding power
• The yield can vary according to several parameters: the state and the porosity of the support, the temperature and the relative hygrometry.
  About 10 m2 /L per coat.

Application :

1. Ready to use.
2. Mix well before use.
3. Best applied in 1 coat (fine on the stains so as not to crack or blister).
4. On a flat surface, use a lacquer roller, while on an uneven background, use a 12 mm textured polyamide roller.
5. Possibility of slightly diluting Primisol to adapt it to the application processes.

Destination :

• Interior: Use indoors on ceilings, walls and doors. Adheres to smooth surfaces, old glossy lacquers after light sanding. Adheres to wood, concrete, plaster, aerated concrete, fiber cement, MDF, plywood.
• Outside: Only under cover.

Conditioning :

5L and 15L.