DSP 800 - Universal stripper gel - Owatrol

DSP 800 - Universal stripper gel - Owatrol

Powerful gel stripper without Dichloromethane or NMP.

Properties :

• Ready to use.
• Gelled: easy to use, does not run.
• The stripper acts in depth, it causes a softening or a cracking of the film according to the nature of the coating
• Eliminate costly sanding and sanding methods.
• Does not darken the wood and leaves all materials intact (except plastics).
• Repainting after 6 hours.
• The practical yield varies according to the type, the thickness of the coating, the state of surface, the absorption of the support as well as the mode of application.
  Variable according to the thickness of the deposited layer (see table on the back) from 1.25 m² to 4 m²/litre.

Application :

1. Apply a thick and uniform coat of DSP 800 using a brush or a synthetic spatula.
2. Leave to act for 7 to 45 minutes depending on the type and thickness of the coating.
   It is advisable to carry out a preliminary efficacy test in order to determine the optimal contact time of the product.
3. Remove with a spatula or nylon brush. Rinse with lukewarm water or White-Spirit.
   After complete drying, sand the surface gently.
4. Wait 6 hours before painting.

Destination :

• Inside and outside.
• Horizontal or vertical supports.
• Applicable on all surfaces: all types of wood, ferrous and non-ferrous metals, stone, cement, tiles, ceramics (except plastics).
• Cladding, flooring, stairs, gates, shutters, gratings, terraces...
• Substrates whose use, nature, quality, condition, treatments and preparations comply with the standards in force.

Conditioning :

1L