ATM Pro - Preventive and curative anti-greening - Concentrate to dilute - No BE - Owatrol

ATM Pro - Preventive and curative anti-greenings - Concentrate to dilute - No BE - Owatrol

ATM Pro destroys and eliminates greenery , red and yellow algae , lichens , molds , fungi ...

Properties :

• ATM Pro is composed of two active agents which give it double effectiveness on the surface and in depth:

1. 1. Quaternary ammonium: Kills surface microorganisms that need light to grow.
   2. Isothiazolinone (OIT): Acts more deeply and eliminates micro-organisms in micro-cavities. Little washed away by rainwater, it considerably delays their reappearance (residual effect).

• ATM Pro spreads very easily thanks to surfactants.
• Acts by encapsulation which deprives the micro-organisms of all oxygen in order to eliminate them within 4 to 6 days if it does not rain.
• Also destroys germs and roots embedded in the support.
• Without rinsing unless painted.
• In a few days, restores the supports to their natural appearance without altering or staining them.
• Can also be used before painting.
• No impact on paints or non-ferrous metals (galva, zinc).
• Without bleach or acid: no risk of bleaching the support.
• 96% biodegradable product*.
• Apply from March to October for best results.
• The yield will vary depending on the contamination and the nature of the support:
  • Light contamination or preventive treatment: ± 5 m² per litre.
  • Significant contamination: ± 3 m² per litre.

Application :

1. Application temperature: between 10 and 25°C.
2. Do not apply in direct sunlight, on a frozen substrate, in rainy or humid weather (plan for a minimum period of 48 hours without precipitation after carrying out the treatment), in strong winds.
3. Proceed with the following dilution of ATM PRO (to be multiplied by 5 for the 5L): - Preventive action: 1 L + 49 L of water.
4. Can treat up to 250 m². - Light curative action: 1 L + 29 L of water.
   Can treat up to 150 m². - Normal curative action: 1 L + 14 L of water.
   Can treat from 45 up to 75 m². - Intense/reinforced curative action: 1 L + 9 L of water.
   Can treat up to 30 m². (See “yield”).
5. On a prepared support, apply a generous spraying or brushing pass in order to thoroughly impregnate the surface to be treated.
6. Lichens, yellow and red algae may require a double application (wait 2 or 3 days).
7. Before any painting work, rinse the support carefully (wait 3 days before rinsing for a preventive treatment and 6 days minimum for a curative treatment), otherwise the dead micro-organisms could harm the grip.
   Greenery must be completely destroyed before painting.
8. During treatment, avoid runoff into streams, ponds, wells, ponds...
   Do not use runoff water.
9. Close the container tightly after use.

destination:

• Common outdoor, vertical and horizontal surfaces: roofs, facades, walls, floors, walkways, terraces, stairs...
• New or old traditional materials: tiles, slates, asbestos cement, cobblestones, shingles, thatch, bricks, stones, plaster, painted substrates, breeze blocks, coatings, tiling, asphalt, interlocking cobblestones, non-ferrous metals (galva, zinc), paints, etc. .

Conditioning :

1L and 5L.