Accessories for StarDrain 3XS - MINI - LINE ECO drainage channels

Accessories for StarDrain 3XS - MINI - LINE ECO drainage channels

StarDrain is a drainage solution made up of plastic channel elements with a designer aluminum grate. StarDrain is used around the house in areas with no traffic.

The first thing to do is determine where the water needs to be drained. The possibilities are a ditch, a sewer, or an infiltration system.

StarDrain has options for a side outlet or a bottom outlet.

The StarDrain infiltration system offers the advantage of requiring only limited piping. Furthermore, this method allows rainwater to be diverted and infiltrated directly into the ground. This also improves the soil's moisture balance.

Accessories :

• About closed.
• About with horizontal outlet of Ø 40 mm.
• Connecting piece.
• Bottom outlet of Ø 75 mm.

There are also other very useful accessories for installing drainage channels or for everyday use:

• Grill lifting tool
• Drilling bell

FAQ - Frequently Asked Questions

1. Are the accessories universal between the 3XS, MINI and LINE ECO ranges?
   Yes, most accessories are designed to be interchangeable, but some features (specific outlets or dedicated angles) may vary depending on the model. It is recommended to check the exact part number before purchasing.
2. Can a LINE ECO drainage channel be connected to an existing drain?
   Yes, thanks to the outlet fittings or vertical outlets, it is possible to easily connect your gutter to the rainwater network.
3. Are corner elements mandatory?
   No, but they facilitate installation in configurations where drainage must follow a clean and aesthetically pleasing right angle.
4. Are the accessories frost-resistant?
   Yes, the materials used (PVC or PP) are frost and weather resistant, suitable for European climates.
5. What is the maximum load these accessories can support?
   They are designed for pedestrian loads (class A15). For a vehicular area, a more robust range of drainage channels must be chosen (class B125 or C250).
6. Can these drainage channels and accessories be installed on a bed of sand?
   It is advisable to use a mortar bed or a concrete base to ensure stability and longevity.
7. How to ensure a good seal?
   Use a suitable PVC adhesive or sealant at critical points (end fittings, outlets). The joints in the StarDrain range are designed to minimize the risk of leaks.
8. Can a single part be replaced without dismantling the entire drainage channel?
   Yes, as long as the element is not embedded in concrete. The accessories (end caps, grilles, outlets) are individually replaceable.