Self-Levelling Screed - Ready-to-Tile Variable Thickness Mortar - Knauf

Self-Levelling Screed - Ready-to-Tile Variable Thickness Mortar - Knauf

The self-leveling screed is a dry mortar prepared in the factory and ready to be mixed.
It is composed of materials based on special cement, aggregates and special additives selected to improve its implementation properties and its mechanical resistance.

• Hydraulic hardening mortar type CT-C30-F6 according to EN 13813 standard.

Application domain :

The self-leveling screed is intended for the realization of cement screeds on most interior floors for the realization of smooth and seamless surfaces.

• Can be applied as an adherent screed or as a floating screed on a separation layer or on suitable insulating panels.
  Under certain conditions, this product is also suitable for application in combination with an underfloor heating system and for the repair of cement screeds.
• Comply with the requirements of the various Technical Information Notes (NIT) of the BBRI for the production of screeds and the laying of floor coverings.

Properties and advantages:

• Ready to tile after 24 hours
• Easy and quick to implement
• Self-leveling
• Suitable for underfloor heating
• Also applicable to machine
• Ready to use
• Fast hardening
• Low shrinkage

Remarks :

1. The technical data apply at a temperature of +20°C and a relative air humidity of 50%.
   Lower temperatures increase the indicated values, higher temperatures decrease them.
2. Protect freshly applied areas from drafts, direct sunlight and excessively high (> +25°C) or too low (< +5°C) temperatures during setting.
3. Immediately clean containers, tools, etc. with clear water.
   Once cured, the product can only be removed by mechanical cleaning.
4. Keep out of reach of children. 5.
5. For further information, consult the safety data sheet available on our website: http://www.knauf.be

Consumption :

About 20 kg/m2 per cm of thickness.

Conditioning :

• 25 kg bag