D Lub 2 Aero - Food-grade penetrating oil - Zep Industries

D Lub 2 Aero - Food-grade penetrating oil - Zep Industries

Food-grade lubricant and penetrating oil .
Its penetrating and lubricating action is particularly necessary when dismantling equipment and machinery heavily seized by dirt , grease , rust , and other corrosion- induced deposits. NSF H1 approved.

Properties :

• Its penetrating and lubricating action is particularly necessary when dismantling equipment and machines that are heavily stuck together with dirt, grease, rust and other deposits induced by corrosion.
• Acts quickly thanks to a unique and highly active blend of natural lubricating oil and modern penetrating solvents.
• The natural oil remains stable, while the solvents break down the corrosion adhesion, allowing the glued parts to be lubricated immediately while the rust is still decomposing.
• Modern penetrating oils have a controlled evaporation rate, which ensures a longer action time and deeper wetting of rusted joints.
• Provides effective protection against corrosion and moisture.
• Leave a thin layer of highly resistant lubricating oil on the parts to prevent further corrosion.
• Completely metal-neutral.
• Free from chlorinated solvents.
• Acid-free and alkali-free.
• Silicone-free.
• Can be used even at temperatures of -15°C.

Applications:

Specifically developed for the quick and easy release of all types of stuck nuts, bolts, hinges, fittings, and other parts, including couplers, starters and separators, battery clamps, and fasteners. It is used in maintenance departments across various industries, especially food processing, as well as in local communities, garages, transport vehicles, hospitals, agricultural settings, wastewater treatment plants, construction, and more.

Instructions for use :

1. Shake before use.
2. Apply the product closely.
3. Leave for one minute on the corrosion or rust, then loosen the parts using a suitable tool.
4. Repeat the treatment if necessary.
5. Use the extension for hard-to-reach places.

Packaging:

400 ml aerosol.

FAQ - Frequently Asked Questions

1. Is D Lub 2 Aero really authorized for use in food environments?
   Yes, it has NSF H1 certification, which makes it usable in areas where accidental contact with food may occur.
2. Can it be used on machines that are in operation?
   It is recommended to stop the machines before application for safety reasons and for better product effectiveness.
3. Does the product leave a greasy film?
   A protective lubricating film remains to prevent corrosion, but it remains discreet, clean and compatible with food standards.
4. Is the penetrating oil corrosive?
   No, on the contrary, it protects metal surfaces against rust and moisture.
5. Can it be used to loosen heavily oxidized bolts?
   Yes, its penetrating formula is designed to penetrate quickly and free even heavily seized parts.
6. Is it odorless?
   Yes, it is odorless and perfectly suited to environments where odors are undesirable.
7. Can it be used on plastics?
   It is compatible with most materials. If in doubt, test on a small area.
8. What is the action time?
   A few seconds are sufficient for most applications. For heavily seized parts, wait 1 to 2 minutes.
9. Is it hydrophobic?
   Yes, its water-repellent action repels moisture and protects the mechanisms.
10. What is the difference between this and a classic penetrating oil?
    D Lub 2 Aero is formulated specifically for the food industry, with a non-toxic and certified composition.