Dyna 143 - Degreasing solvent - Zep Industries

Normal evaporation solvent for use in degreasing fountains and which degreases all greasy and oily mechanical parts , filters, gearboxes, injection pumps, clutches, engine blocks, leaf springs, etc.

Packaging:
1 Item
€191.58Tax Included
ZEP 6760.20
8717342013897

Dyna 143 - Degreasing solvent - Zep Industries

Normal evaporation solvent for use in degreasing fountains.
Degreases all greasy and oily mechanical parts , filters, gearboxes, injection pumps, clutches, engine blocks, leaf springs, etc.

Cleans characters, rollers, printing inkwells and offset machines.
Cleans de-energized electric motors. Flash point above 60°C.

Properties :

  • Degreaser and cleaner : Degreases mechanical parts contaminated with oil or grease such as filters, gearboxes, injection pumps, couplings, engine blocks, suspensions, etc.
    Cleans letters, rollers, ink tanks of printing and offset machines, voltage-free electric motors.
  • Excellent resolving capacity : Dissolves oil, grease, lubricating oil, light and heavy fuel oils.
  • High flash point : Flash point above 61°C.
  • Low volatile solvent : Minimizes product loss through evaporation.
    Lower exposure of vapors to the user provides a better working environment.
  • Anti-corrosion : Leaves a protective film to prevent corrosion and rust.
  • VOCI Free : Does not contain volatile aliphatic chlorinated hydrocarbons (chlorinated solvents) or glycols.
  • Registered NSF K1 : Registration number 158364.
    Authorized as a cleaner and degreaser for use in non-treatment areas.
    A water rinse is necessary before returning the equipment to the room where the food is processed.

Applications:

Workshops, gas stations, parking lots, transport and maintenance services, etc.
The product is recommended when a high contact time between solvent and part is desired.
Ideal for cleaning aeronautical components.

Manual :

  1. It is recommended to use Zep MBS 60, MBS 210 or DYNA CLEAN PLUS parts cleaner.
  2. Place the parts in the parts cleaner.
  3. Accelerate degreasing by using the brush until the dirt is completely gone.
  4. For faster drying, dry the parts with compressed air.
  5. The product can also be used by brush, cloth or spray and can be used with ultrasonic baths without heating.

Conditioning :

20 L, 60 L and 210 L.

Zep Industries
ZEP 6760.20
1 Item

Data sheet

Signal word
DANGER
Hazard statements
H304 – May be fatal if swallowed and enters airways.
Hazard pictogram
Hazard pictogram : GHS08 - Health hazard GHS08 - Health hazard
 

Specific References

EAN13
8717342013897
There are no reviews for this product yet.