Couche protectrice pour marbre 250 ml - n°35 - HG

Protective layer for marble 250 ml - HG

Because of its effect on the stone waterproofing, it is ideal for wet areas such as bathrooms, work plans, the windowsills and tables, for example. It can also be used outdoors, where it will reduce the risk of discoloration of blooms from frost damage, mould and d "algae. 250 ml sufficient to treat 5 to 10 sqm.

< stroNG >Applications:

(1) clean the support carefully, so that it is free of grease and dust.

(2) the product must be applied pure, generously, straight band, using a roll of painter or a brush always handled in the same way. On vertical surfaces, always work from the top down. Do not process more than 6 to 8 m² both.

3) after four minutes, wipe excess liquid with a cloth clean and lint. If a film forms However, should discard it immediately with turpentine.

4) for a optimum protection of very porous surfaces, apply one to two additional layers after the first. Each layer must dry at least one hour before the next application.

(5) leave the treated surface for about 12 hours, without touching or expose it to moisture. Protection of the surface is maximum after 24 hours.

< strong > consumption:

About 5 to 10 m² per 250 ml < /.p >