Film protecteur mat pour pierre naturelle 1 L - n°34 - HG

Matte protective film for natural stone 1 L - HG

This protects the upper layer of natural stone and marble against wear, scratches, corrosion due to acidic substances such as sodas and other damage. This protective film also gives the soil an anti-slip effect. 1 liter of product is enough to treat about 40 m². This product is also available in bright version.

Applications:

(1) clean the support carefully, so that it is free of grease and dust. For the necessary treatment: refer to HG treatment advice for soils in natural stone on the side of the bottle.

(2) adhesive / mortar and new tile joints must have finished take and be completely dry. It takes 4-6 weeks for this.

(3) the existing soil must be dry. Cut all possible underfloor heating at least 12 hours before applying this product.

(4) do not shake before use, but reverse the bottle closed several times to mix the contents without the lather.

(5) for good to distribute the product, preferably use a broom MOP (see the label attached to the neck of the bottle). If necessary, it is also possible to use a clean, lint cloth wrapped around a squeegee. On surfacesrough, use a roll of painter. However, in doing so, prevent too much foam during application.

(6) pour the pure liquid on the floor and spread it without pressure on the brush or roller and still working in the same direction.

(7) once the dry product (after about 60 minutes), a second coat may be applied in the same direction as the first.

(8) the surface is accessible for 1 to 2 hours after the last coat, and the product is completely dry after three days.

Consumption:

About 40 m2 per litre and per layer.