Active cleaner - Special cleaner for exterior surfaces - Lithofin

Active cleaner - Special cleaner for exterior surfaces - Lithofin

For intensive and delicate cleaning of outdoor surfaces such as terraces and balconies, paths, stairs, entrances, walls, etc.

Suitable for ceramic, natural stone and concrete slabs, clinker, plaster and similar mineral surfaces.

Lithofin active cleaner effectively dissolves ordinary dirt, discolorations and stubborn stains.

It restores clarity and cleanliness to all surfaces.

Technical specifications :

• Density: approx. 1.0g/cm3
• pH: approx. 11 (concentrated)
• Appearance: light yellow
• Smell: fragrant
• Solubility in water: very good

Application domain :

For the scrupulous cleaning of ceramic tiles, natural stones and concrete in outdoor areas such as stairs, terraces, sidewalks, walls, etc.

Manual :

• Apply the Lithofin active cleaner undiluted using a sprayer or similar tool and distribute it using a brush.
• Depending on the stubbornness of the dirt, leave to act for approx. 2 to 10 hours, or overnight for the most stubborn dirt.
• Brush and then rinse with water.

Warning: carry out a test on a small surface. Protect treated surfaces from rain for approx. 4 hours. Splashes on textiles immediately cause stains to appear. Rinse immediately and thoroughly any splashes on plants, metals, wood, 1C mortar, and if possible protect them beforehand.

Yield :

• up to approx. 15 m²/litre on ceramic tiles
• approx. 5 m²/litre on natural stones and concrete slabs depending on absorption capacity.