New products
All New Products
      704 Clavex Plus HP - Mortier de scellement et de calage - Parexlanko
      • 704 Clavex Plus HP - Mortier de scellement et de calage - Parexlanko

      704 Clavex Plus HP - Mortier de scellement et de calage - Parexlanko

      Sealing and cushioning mortar with compensated shrinkage.

      Product temporarily unavailable. Contact us, we may have an estimated restock time, or an equivalent or complementary solution.
      CHF27.03Tax Included

      Volume discounts

      QuantityYou SaveUnit price
      55 %CHF25.68
      108 %CHF24.87
      2413 %CHF23.52
      PAR 634955
      3555432232996

      704 Clavex Plus HP - Sealing and cushioning mortar - Parexlanko

      Ready-to-spoil mortar with compensated shrinkage of flowing or plastic consistency for sealing and cushioning.
      Complies with EN 1504-6 sealing.
      Complies with NF P 18-821 category 7 setting
      • High fluidity.
      • High mechanical strength.
      • Pompable.

      Fields of application:

      • Intended for cushioning and keying from 5 to 150 mm per pass.
      • For thicknesses greater than 150 mm, contact our sales manager.
      • Suitable for setting support devices, heavy machinery, rails.
      • Suitable for sealing steel bar, tie rods, connectors (molded walls), anchor rods
      • Keying of prefabricated elements.
      • Revivals in underpinning.

      Characteristics:

      • Active constituents based on hydraulic binders.
      • Grey powder ready to wet.
      • Particle size: 0 - 1.6 mm.
      • Paste density: about 2.2.
      • pH of mortar: 12.5.
      • D.P.U. at 20°C:
        • 1 h 30 in sealing.
        • 1 h 30 in stalling.
      • Maneuverability:
        • Flowing consistency (timing) flow time at the MARSH cone nozzle 12.5 mm, 25 seconds immediately after spoiling and 33 seconds after rest of 1 h 30.
      • Tear resistance to 7 days: according to standard NF EN 1881 (floor).
      • Hole diameter: 30 mm.
      • Steel bar H.A.: Ø 16 mm.
      • Anchor depth: 150 mm.
      • Displacement: under tensile force of 75 kN < 0.6 mm.
      • Limit tensile force: 100 kN.
      • Placement suitability test according to P18 832: bubble surface < 5 %.

      Conditioning:

      Bag of 25 kg.

      Parexlanko
      PAR 634955

      Data sheet

      Signal word
      DANGER
      Hazard statements
      H315 – Causes skin irritation.
      H317 – May cause an allergic skin reaction.
      H318 – Causes serious eye damage.
      H335 – May cause respiratory irritation.
      Hazard pictogram
      Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
      Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
       

      Specific References

      EAN13
      3555432232996