New products
All New Products
      704 Clavex Plus HP - Mortier de scellement et de calage - Parexlanko
      • 704 Clavex Plus HP - Mortier de scellement et de calage - Parexlanko

      704 Clavex Plus HP - Mortier de scellement et de calage - Parexlanko

      Sealing and cushioning mortar with compensated shrinkage.

      Product temporarily unavailable. Contact us, we may have an estimated restock time, or an equivalent or complementary solution.
      €28.87Tax Included

      Volume discounts

      QuantityYou SaveUnit price
      55 %€27.42
      108 %€26.56
      2413 %€25.11
      PAR 634955
      3555432232996

      704 Clavex Plus HP - Sealing and cushioning mortar - Parexlanko

      Ready-to-spoil mortar with compensated shrinkage of flowing or plastic consistency for sealing and cushioning.
      Complies with EN 1504-6 sealing.
      Complies with NF P 18-821 category 7 setting
      • High fluidity.
      • High mechanical strength.
      • Pompable.

      Fields of application:

      • Intended for cushioning and keying from 5 to 150 mm per pass.
      • For thicknesses greater than 150 mm, contact our sales manager.
      • Suitable for setting support devices, heavy machinery, rails.
      • Suitable for sealing steel bar, tie rods, connectors (molded walls), anchor rods
      • Keying of prefabricated elements.
      • Revivals in underpinning.

      Characteristics:

      • Active constituents based on hydraulic binders.
      • Grey powder ready to wet.
      • Particle size: 0 - 1.6 mm.
      • Paste density: about 2.2.
      • pH of mortar: 12.5.
      • D.P.U. at 20°C:
        • 1 h 30 in sealing.
        • 1 h 30 in stalling.
      • Maneuverability:
        • Flowing consistency (timing) flow time at the MARSH cone nozzle 12.5 mm, 25 seconds immediately after spoiling and 33 seconds after rest of 1 h 30.
      • Tear resistance to 7 days: according to standard NF EN 1881 (floor).
      • Hole diameter: 30 mm.
      • Steel bar H.A.: Ø 16 mm.
      • Anchor depth: 150 mm.
      • Displacement: under tensile force of 75 kN < 0.6 mm.
      • Limit tensile force: 100 kN.
      • Placement suitability test according to P18 832: bubble surface < 5 %.

      Conditioning:

      Bag of 25 kg.

      Parexlanko
      PAR 634955

      Data sheet

      Signal word
      DANGER
      Hazard statements
      H315 – Causes skin irritation.
      H317 – May cause an allergic skin reaction.
      H318 – Causes serious eye damage.
      H335 – May cause respiratory irritation.
      Hazard pictogram
      Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
      Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
       

      Specific References

      EAN13
      3555432232996