Solo - Pore filler and floor wax - Zep Industries

Solo - Pore filler and floor wax - Zep Industries

Gives, when drying, a very hard, exceptionally shiny finish which offers unparalleled resistance to scratches and shoe marks .

Properties :

• Non-slip: complies with slip tests (ASTM D-2047), if maintained correctly.
• Gives, when dry, a very hard, exceptionally shiny finish which offers unparalleled resistance to scratches and shoe marks.
• Versatile: Can be used on a wide variety of floors without filler.
• Its high copolymer content allows maximum shine to be obtained with few coats.
• High covering power: 40 to 50 m2/l per coat.  Water-based wax: easy to apply.
• Economical: a single product for two functions, filler and finishing.
• Easy to maintain: gives a hard, transparent film that is easy to maintain with the spray method (Buff-Up) or weekly polishing at medium speed.
• Clean daily with a flat broom using a neutral detergent such as KDS 3 or Vitashok, without altering its shine.
• Does not leave marks, dries in 30 minutes, fuses well with existing waxes.
  

Applications:

Wax, based on metallic acrylic copolymers, designed to achieve an exceptionally strong and durable glossy finish on most tile floors, thermoplastics for hospitals, retirement homes, communities, supermarkets, car dealerships, schools, stores, hotels, industries and communities, etc.

Manual :

Set up :

1. SOLO is used pure. Apply with a faubert rayon broom. A minimum of 3 coats are recommended depending on the porosity of the soil.
2. Let dry 30-45 min between each coat. For optimal results, let dry as long as possible.
3. If necessary, strip old waxes with SPECIAL or DETSOL.

Maintenance :

1. Wash the floor as often as necessary with a neutral detergent such as KDS 3 or Vitashok and using a flat broom.
2. Renovate with Buff-Up or polish periodically to maintain shine, remove scuffs and shoe marks with a medium speed single-brush.
3. A new layer of SOLO can be applied during renovation, after having carefully cleaned the floor.
4. As a rule, after ten such operations, it is advisable to strip and repeat the treatment.

Conditioning :

5 Liters.