Cold Mix Asphalt - Tinascoat 0/5 - Cold Mix Asphalt - IKO

Tinascoat 0/5 - Cold Mix Asphalt - Hydrocarbon asphalt for cold application - IKO

Temporary repairs or reprofiling of hydrocarbon pavements subjected to low or medium traffic.

Temporary repairs or reprofiling of coatings

hydrocarbons subject to low or medium traffic.

e.g.: public road surfaces, driveways, entrances and garage areas,

parking lot, factory yard.

Properties :

• Ready to use
• Very good adhesion
• Immediate repair.
• IKOpro TINASCOAT retains a high internal flexibility which contributes to its post-compaction.
• Simple installation: implementation can be carried out by unskilled labor, without specialized tools.
• Economic use: no loss or waste.

Features:

• Color: Glossy Black
• Caliber: 0/5 - open texture

Consumption:

25 kg/m² and per centimeter of thickness.

Application:

1. Preparing the support
   • Cut away the damaged area to create clean edges. Clean the surface with a wire brush. Remove any water and mud.
   • It is always advisable to coat the base and edges of the area to be repaired with IKO Tinascoat primer spray
2. Application of the IKOpro TINASCOAT
   • TINASCOAT is spread with a rake and compacted with a tamper or other suitable tool or equipment.
   • Sandblasting is recommended when the temperature is high.

Note: The IKOpro TINASCOAT layer cannot exceed 4 cm in thickness after compaction.

If the deterioration is deeper, the sub-layer will be made using well-compacted gravel (size 0/22).

Conservation:

6 months, in a cool room

FAQ - Frequently Asked Questions

1. Can cold asphalt be used in winter?
   Yes, Tinascoat 0/5 remains workable even in cold temperatures and can be applied all year round.
2. What is the drying time?
   Cold asphalt doesn't "dry" like mortar. It hardens gradually under the influence of traffic and time. Light traffic: immediate hardening. Heavy traffic: a few days for optimal compaction.
3. Is mechanical compaction necessary?
   Recommended, but not essential. A vehicle visit is often sufficient for minor repairs.
4. Can it be used on concrete?
   Yes, preferably by applying a bituminous primer to improve adhesion.
5. How to store an opened bag?
   Seal tightly and store away from air and heat. The product remains usable for several weeks.
6. What is the maximum recommended thickness?
   It is recommended to proceed in layers of 3 to 5 cm, compacting each layer for optimal durability.
7. Is the finish black like a classic asphalt surface?
   Yes, it takes on a natural bituminous black tint, which stabilizes over time.
8. Is it suitable for industrial car parks?
   Yes, provided that careful compaction is respected and several layers are applied for high-stress areas.
9. Can we walk on it immediately?
   Yes, pedestrian traffic can be opened immediately.