Primer Bitumen SR - Quick-drying bituminous impregnating filler - IKO Pro

Primer Bitumen SR - Quick-drying bituminous impregnating filler - IKO Pro

Quick-drying cold bituminous impregnation coating of any support before the implementation of bituminous waterproofing coatings .

Drying time approximately 30 minutes , depending on the substrate and atmospheric conditions.

Activation of the support before the implementation of bituminous membranes IKO roofing and liquid products IKO pro.

Can be applied on many substrates such as concrete , metal , wood , cement and bituminous coatings .

Implementation :

The substrate must be in good condition, clean, free of grease and free from all loose particles.

If there are green deposits (algae, mould, etc.), remove them with a stiff broom and clean the surface with IKO pro Stop Green Deposits .

Apply IKO pro Primer Bitumen SR in a single coat using a brush, roller or pressure gun.

The primer must be completely dry before applying IKO roofing bituminous membranes or IKO pro liquid products.

Color :

• Black.

Consumption :

• Bitumen: ± 0.2 L/m²
• Concrete: 0.25-0.3 L/m²
• Metal: 0.07-0.1 L/m²
• Fiber cement: 0.08-0.1 L/m²

Tool cleaning:

• White spirit.

Technical properties:

• Dry matter: ± 46%
• Density: ± 0.89 g/cm³
• Viscosity: 9-14 mm²/sec (Ubelhode 40°C)