Primer Bitumen Adérosol - Cold bituminous impregnation coating - IKO Pro

Primer Bitumen Adérosol - Cold bituminous impregnation coating - IKO Pro

Coating of cold bituminous impregnation of any support before the implementation of bituminous sealing coatings .

Activation of the support before the implementation of bituminous membranes IKO roofing and liquid products IKO pro.

Can be applied on many substrates such as concrete , metal , wood , cement and bituminous coatings .

Drying time approximately 2 hours, depending on substrate and weather conditions.

Implementation :

The substrate must be in good condition, clean, free of grease and free from all loose particles.

If there are green deposits (algae, mould, etc.), remove them with a stiff broom and clean the surface with IKO pro Stop Green Deposits .

Apply IKO pro Adérosol Bitumen Primer in a single coat using a brush, roller or pressure gun.

The primer must be completely dry before applying IKO roofing bituminous membranes or IKO pro liquid products.

Color :

• Black.

Consumption :

• Bitumen: ± 0.2 L/m²
• Concrete: 0.25-0.3 L/m²
• Metal: 0.07-0.1 L/m²
• Fiber cement: 0.08-0.1 L/m²

Tool cleaning:

• White spirit.

Technical properties:

• Dry matter: ± 50%
• Density: ± 0.89 g/cm³
• Viscosity: 8-12% Torque (Brookfield 25°C, spindle 2/50 rpm)