Primer Acryl - Water-based acrylic adhesion primer - IKO Pro

Primer Acryl - Water-based acrylic adhesion primer - IKO Pro

Acrylic adhesion primer for the preparation of the support for the application of IKO pro Paint for Slates and Wall Paint.

The application of IKO pro Primer Acryl is mandatory on powdery or porous surfaces, or where there is a risk of rising damp .

Implementation :

The substrate must be in good condition, clean, free of grease and free from all loose particles.

If there are green deposits (algae, mould, etc.), remove them with a stiff broom and clean the surface with IKO pro Stop Green Deposits .

The application and drying temperature must be between 5°C and 35°C.

Apply IKO pro Primer Acryl by brush, roller or airless spray (0.025 inch opening) until the substrate is saturated.

Consumption :

• ± 0.2 L/m² in one coat.

Tool cleaning:

• Immediately in the water.

Technical properties:

• Dry matter: ± 20%
• Density: ± 1.1g/cm³