DtoxGuard Ext - Pollution control and purification of outdoor air - Guard Industrie

DtoxGuard Ext - Pollution control and purification of outdoor air - Guard Industrie

Clean and self-cleaning lasure to purify the outside air.
DtoxGuard Ext is a colorless lasure for porous mineral supports outdoors. It purifies the air by degrading pollution (nitrogen oxides - NOx) by photocatalysis. DtoxGuard Ext also degrades organic dirt that can be deposited on a treated surface. This one stays clean by natural rinsing by rainwater.

DtoxGuard Ext is a non-filmogenic impregnation product, thus remaining permeable to air and water vapour. Colorless after application, it does not change the appearance or nature of the treated medium. In addition, it is perfectly resistant to UV rays and does not yellow over time.

Benefits:

• Purifies the air by degrading organic dirt and photocatalysis pollution
• Self-cleaning
• Effective against nitrogen oxides - NOx
• Does not form a film, lets the support breathe
• Colorless

Use:

• Porous materials: natural or reconstituted stones, concrete, terracotta, coating, etc.
• Facades and walls
• New or old
• Outside
• Preparing support:
• Apply the product to a clean, dusted, grease-free and dry surface.

Application:

• Use the product in its purest form: do not dilute.
• Shake the packaging well before use and do a pre-test.
• Apply from bottom to top.
• The support should be impregnated in 2 to 3 layers.
• Drying time between each layer: 20 minutes at 20oC.
• Do not overload the support, remove any excess before drying with a dry roller.
• Protected drying: 24 hours of rain, 48 hours of stains.
• Optimal efficiency obtained after 7 days.

Application tools:

Apply to HVLP, roller or brush.

Consumption:

7 to 10 m2/L.