Stripgel - Paint and varnish stripper - Zep Industries

Stripgel - Paint and varnish stripper - Zep Industries

Stripping of common paints and graffiti on all surfaces, removing several layers of paint at once, even very old ones.

It is applied by simple coating.
Without flash point according to standard NF EN 22719.

Properties :

• Excellent penetration into the joint.
• It is applied by simple coating.
• Rinses off very easily with water.
• No attack on light alloys.
• Solvent used to dissolve rubber and plastics.
• It can be used on vertical surfaces thanks to its gel form.

Instructions for use:

1. Using a brush, apply pure Stripgel to the surface to be stripped, leave to act for 15 to 20 minutes.
2. Use a spatula to remove the glue or rinse with pressurized water.
3. For better rinsing, use a pressure washer.
   In bath: immerse the parts using a basket in a container (preferably stainless steel) of pure product.
4. Leave for 10 minutes, remove the basket and rinse with pressurized water.
5. To achieve a good rinse, use a pressure washer.
6. Note: when the temperature is below 15°C, it is advisable to shake the keg well before use.

Packaging:

33 kg.

FAQ - Frequently Asked Questions

1. On what surfaces can I use Stripgel?
   Stripgel is suitable for wood, metal, concrete, stone, tiles and other mineral surfaces. On plastics or composites, test first.
2. Does the product work on modern paints (acrylic, alkyd)?
   Yes, Stripgel removes most acrylic, alkyd, polyurethane paints, as well as varnishes and stains.
3. How long should it be left to act?
   Between 5 and 30 minutes. Some very hard layers may require a second pass.
4. Can it be used indoors?
   Yes, but it is recommended to ensure good ventilation during application.
5. Do I need to rinse after use?
   Yes, rinsing with water or using a damp cloth is recommended before repainting or revarnishing.
6. Does Stripgel damage wood?
   No, it does not damage the surface when used according to the instructions. However, light sanding may be helpful for the finish.
7. Is the product effective on multiple layers of paint?
   Yes, Stripgel is formulated to remove multiple layers in a single application. For very old or thick layers, a second application may be necessary.
8. Is it compatible with antique furniture?
   Yes, provided you test it beforehand. Its gentle formula allows you to restore furniture without damaging it.
9. How to optimize the effectiveness of the paint stripper?
   Apply a thick layer, avoid drafts and, if necessary, cover with plastic film to prolong the action.
10. What is the average consumption?
    Approximately 0.3 to 0.5 L/m², depending on the type of coating and the thickness to be removed.