Marmorkitt 1000 Universal - Creamy glue - Akemi

Marmorkitt 1000 Universal - Creamy glue - Akemi

Creamy polyester glue for stone , filled and fluid for filling small holes or cracks and for gluing natural stones on horizontal surfaces.

Features :

• Good applicability on horizontal surfaces thanks to the liquid and creamy consistency
• Fast hardening (20 to 40 minutes)
• Good workability (sanding, boring, milling)
• Very good polishing ability
• Very good adhesion on natural stones, also at high temperatures (70-80°C, at low loading up to 100-110°C)
• Resistant to water, petrol and mineral oils

Use :

1. The bottom to be treated must be clean, completely dry and roughened.
2. The glue can be colored with AKEMI dyes for polyester up to 5%; Dilution is possible in any proportion with Marmorkitt Transparent extra liquid.
3. Add 1-4 g of white hardener to a quantity of 100 g of glue (1 g corresponds to approximately 4-5 cm taken out of the tube).
4. Thoroughly mix the two components; the mixture is then ready to use for 3 – 10 minutes (at 20°C).
5. After 15-35 minutes the treated parts can be worked on (eg sanded, milled, drilled).
6. Heat accelerates and cold slows hardening.
7. Work devices can be cleaned with AKEMI Nitro-Thinner.

Conditioning :

• 150ml
• 1L
• 5L

Color :

Natural, Ivory / Neutral, White and Black.